645294
51
Zoom out
Zoom in
Previous page
1/63
Next page
51
Advanced Setup
—Continued
Setting the Audio Input Format
Setting the Digital Input Format
Normally, the TX-L55 detects the format of digital audio
signals automatically. However, if you experience either
of the following issues when playing PCM or DTS mate-
rial, you may need to specify the format yourself:
•With PCM material, if the beginnings of tracks are cut
off, try setting the format to PCM.
•With DTS material, if noise is produced when fast for-
warding or reversing, try setting the format to DTS.
Input Source Audio Setup
1
Use the INPUT SELECTOR but-
tons to select the input source
that you want to set.
2
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
3
Use the Up and Down [ ]/[ ]
buttons to select “4.Input Set,
and then press [ENTER].
4
Use the Up and Down buttons to
select “Audio, and then use the
Left and Right [ ]/[ ] buttons to
select:
Auto:
The assigned digital input
(page 31) has priority over the
input source’s analog input. If
no digital signal is present,
the analog input is used.
Multi:
The DVD multichannel input
is used.
Analog:
The input source’s analog
input is used even if a digital
signal is present at the
assigned digital input.
5
Press the [SETUP] button.
The setup menu closes.
TV AUX
TUN
DVD
V1
INPUT SELECTOR
V2
AMP
TUNER
ENTER
ENTER
1
Use the INPUT SELECTOR but-
tons to select the input source
that you want to set.
2
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
3
Use the Up and Down [ ]/[ ]
buttons to select “4. Input Set,
and then press [ENTER].
4
Use the Up and Down buttons to
select “Format, and then use the
Left and Right [ ]/[ ] buttons to
select:
All:
PCM, Dolby Digital, and DTS for-
mats are detected automatically. If no
digital signal is present, the input
source’s analog input is used.
DTS:
Select this option if playing DTS
sources with the All option produces
noise while the TX-L55 identifies the
signal format or when fast forward or
fast reverse is used. If the input signal is
not DTS, nothing will be output.
PCM:
Select this option if playing a
CD or other PCM source with the All
option causes the tops of tracks to be
cut off. If the input signal is not PCM,
nothing will be output.
TV AUX
TUN
DVD
V1
INPUT SELECTOR
V2
AMP
TUNER
ENTER
ENTER
TX-L55_En.book Page 51 Tuesday, June 1, 2004 9:02 AM
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-L55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-L55 in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info