553753
31
Zoom out
Zoom in
Previous page
1/64
Next page
31
Changing the audio mode
Press the AUDIO SELECTOR button on the front panel (or AUDIO
button on the remote controller) to change the audio mode. Each
time the button is pressed, the mode changes from AUTO
Multich Analog and back to AUTO. The AUTO audio
mode is recommended for normal circumstances.
Enjoying music or videos with the TX-DS696
AUTO (automatic detection): With this setting, the TX-DS696
automatically detects whether the input signal is digital or analog.
When a digital signal is not input, then the analog signal is played.
Multichannel: Select this setting to play back the input from the
component connected to the MULTI CHANNEL INPUT port. This
setting is effective when the Multichannel setting in the Audio Setup
sub-menu is set to Yes (see pages 24, 39).
Analog: Select this setting to play back the input from a source
component connected to an analog audio input jacks. With this
setting, even if a digital signal is input from the same component,
only the analog signal will be output.
AUDIO
SELECTOR
3. Turn on the connected component and start playing
the desired media.
4. If necessary, adjust the output level of each speaker
as desired (see page 30).
Adjust the speaker output levels so that you can hear the same
sound level from each speaker at the listening position. For the
front right, front left, center, surround right, and surround left
speakers, the output levels can be adjusted between 12 to +12
decibels. The subwoofer can be adjusted between 30 to +12
decibels.
5. Adjust the volume with the MASTER VOLUME dial or
the VOL
buttons on the remote controller.
AUDIO
SELECTOR
Using the tone control:
To make the BASS and TREBLE dials work for multichannel
sources, you must first set the tone control to On.
1. Turn the tone control on by pressing either the jog
dial on the TX-DS696 or the DIRECT button on the
remote controller.
MASTER VOLUME
TX-DS696 Remote controller
TX-DS696 Remote controller
TX-DS696 Remote controller
MUTING
HOME THEATER CONTROLLER
RC
-
440M
STANDBY/ON
STANDBY
OFF
ON
POWER
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS
696
PHONES
FM AM PHONO C
DTAPEDVD
REC OUT
ZONE
2
ZONE
2
LEVEL
CH LEVEL
VIDEO
3
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
AUDIO
SELECTOR
TUNING PRESET
SMART
SCAN
NAVIGATOR
PRESET MEMORY
FM
MODEDISPLAY DIMMER
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
RETURN
MASTER VOLUME
VOL
DIRECT
AUDIO
AUDIO SELECTOR
TREBLEBASS
Enjoying the multichannel output
Before starting operations, first make sure that the multichannel
connection is properly made and that the Multichannel setting of the
Input Setup Audio Setup submenu is set to Yes.
1. Press the input source button for the component with
multichannel output connected to the MULTI
CHANNEL INPUT on the rear of the TX-DS696.
2. Select Multich using the AUDIO SELECTOR button
on the front panel (AUDIO button on the remote
controller).
BASS
TREBLE
PUSH TO ENTER
DSP
/
MODE ADJ
Jog dial
When pressed only once, the current setting appears, so press
twice to change the setting.
2. Adjust the tone using the BASS and TREBLE dials.
TX-DS696 Remote controller
Notes:
Adjusting the volume level of each speaker for the MULTI CH
INPUT source does not affect the speaker level adjusted by the
listening position.
If the speaker level is set to +1 dB or higher, the maximum level
indicated on the display will change if you raise the volume
level.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info