553753
33
Zoom out
Zoom in
Previous page
1/64
Next page
33
Using listening mode
Changing the listening mode
To change the listening mode during playback, press the listening
mode buttons on the remote controller.
You can also set the listening mode using the jog dial on the TX-
DS696. Push the jog dial repeatedly to cycle the listening mode from
DirectStereoSurroundAll Ch StereoDirect. Turn the jog
dial to change the listening mode in the same manner as DSP
/ on
the remote controller.
DIRECT: Changes the listening mode directly to the Direct
listening mode. If pressed, the listening mode for the selected input
source set in the Listening Mode Preset sub-menu is also changed to
the Direct listening mode.
STEREO: Changes the listening mode directly to the Stereo
listening mode. If pressed, the listening mode for the selected input
source set in the Listening Mode Preset sub-menu is also changed to
the Stereo listening mode.
SURR (Surround): Changes the listening mode to the surround
mode for the current input signal (e.g., Dolby Pro Logic II, Dolby
Digital, or DTS). If pressed, the listening mode for the selected input
source set in the Listening Mode Preset sub-menu is also changed to
the Surround listening mode.
For Dolby Pro Logic II, this button also changes the mode between
Dolby Pro Logic II Movie and Dolby Pro Logic II Music.
A.ST(All Channel Stereo): Changes the listening mode directly to
the Stereo listening mode. If pressed, the listening mode for the
selected input source set in the Listening Mode Preset sub-menu is
also changed to the All Channel Stereo listening mode.
DSP
/ : Changes the listening mode as shown below.
Direct Stereo Surround Orchestra Unplugged
Studio-Mix TV Logic All Ch Stereo Direct.
If pressed, the listening mode for the selected input source set in the
Listening Mode Preset sub-menu is also changed.
Note:
If you want to switch between Dolby Pro Logic II Movie and Dolby
Pro Logic II Music at the TX-DS696, press the jog dial and select
Surround for the listening mode.
PUSH TO ENTER
DSP
/
MODE ADJ
TX-DS696 Remote controller
Using Cinema Re-Equalization
Depending on the listening mode, you can either turn Re-EQ on or
off. Re-EQ (re-equalization) takes the edginess or brightness out
of your home cinema sound to compensate for the fact that sound
mixed for theaters may sound too bright when played back through
speakers in the home environment.
Remote cotroller only
On: Select to turn on the re-equalization filter.
Off: Select to turn off the re-equalization filter.
Note:
The Re-EQ function is effective on the Dolby Pro Logic II Surround
and Dolby Digital Surround.
MUTING
HOME THEATER CONTROLLER
RC
-
440M
STANDBY/ON
STANDBY
OFF
ON
POWER
MASTER VOLUME
BASS
TREBLE
AV
RECEIVER
TX
-
DS
696
PHONES
FM AM PHONO C
DTAPEDVD
REC OUT
ZONE
2
ZONE
2
LEVEL
CH LEVEL
VIDEO
3
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
AUDIO
SELECTOR
TUNING PRESET
SMART
SCAN
NAVIGATOR
PRESET MEMORY
FM
MODEDISPLAY DIMMER
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
RETURN
Re-EQ
Listening
mode
buttons
Jog dial
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-DS696 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-DS696 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-DS696

Onkyo TX-DS696 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info