601422
11
Zoom out
Zoom in
Previous page
1/156
Next page
11
Index Parts and Facilities
—Continued
For further operational instructions, see the pages
indicated in brackets [ ].
1
Power switch [52]
Press to turn on and off the main power supply for
the RDC-7.1. When the RDC-7.1 is turned on with
the [Power] switch, the [Standby] indicator lights.
Before turning on the power, check to make sure
that all cords are properly connected.
When the power is turned on, a sudden surge of
current will occur that may adversely affect the
operation of other devices. To prevent this, do not
plug the RDC-7.1 into the same circuit used by
sensitive equipment, e.g., computers.
2
Standby/On button and On indicator [52]
If pressed with the [Power] switch turned on, the
RDC-7.1 turns on and the display and [On] indicator
light up. If pressed again, the RDC-7.1 returns to the
standby state. In the standby state, the display and
[On] indicator are turned off and the RDC-7.1 cannot
be operated.
3
Standby indicator [9, 52]
Lights when the RDC-7.1 is in the standby state and
when a signal is received from the remote controller.
4
Remote control sensor [9]
5
Front display
6
Master Volume dial [52]
Use to control the volume in the main zone. The
volume for the remote zone (Zone 2 and Zone 3) is
independent.
7
Open/Close button
Press this button to open and close the front door
that covers the lower buttons.
8
Input source buttons and indicators (DVD,
Video 1–7, Tape 1-2, Tuner, Phono, CD, and
Net Audio) [52, 62, 65, 80]
Press these buttons to select the input source for the
main zone. When an input source is selected, the
indicator will light in blue.
To select the input source for the remote zone (Zone
2), rst press the [Zone 2] button, and then the
desired input source button.
To select the input source for the remote zone (Zone
3) or recording out (Rec Out), rst press the [Rec/
Zone 3] button, and then the desired input source
button.
9
Zone 2 (GRN) and Rec/Zone 3 (RED)
Indicator [70, 72]
For Zone 2, the indicator above the selected input
source button will light green. For recording or
Zone 3, it will light red. When the same input
source is selected for Zone 2 and Rec/Zone 3, it will
light orange.
0
Pure Audio indicator [61]
Lights during pure audio playback.
Getting Started
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo RDC-7.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo RDC-7.1 in the language / languages: English as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo RDC-7.1

Onkyo RDC-7.1 User Manual - German - 156 pages

Onkyo RDC-7.1 User Manual - Dutch - 156 pages

Onkyo RDC-7.1 User Manual - French - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info