601422
13
Zoom out
Zoom in
Previous page
1/156
Next page
13
Index Parts and Facilities
—Continued
C
Off [71]
When not using either Rec/Zone 3 or Zone 2, press
that button and then press the [Off] button to turn
off the signal.
If the Rec/Zone 3 or Zone 2 signal is turned on and
the connected component is not turned on, the
electric signal will still be sent through the circuitry
and the excess load may cause deterioration of the
audio signal.
D
Display button [56]
Press to display information about the current input
source signal. Each time you press the [Display]
button, the screen changes to show you different
information concerning the input signal.
E
DSP [61]
Press these buttons to scroll through the listening
modes and set a new one for the input source you
are currently listening to. For each different input
signal, different listening modes are possible. See
page 58 for a detailed explanation of the different
listening modes.
F
Dimmer button (Other than European
models) [54]
Press to set the brightness of the front display. There are
four settings available: normal, dark, very dark, and
volume only.
For European models, this function can be operated
only with the remote controller.
F
RT/PTY/TP button (European models only) [65]
This button is only available on European models.
Press this button to tune into the Radio Data System
(RDS) for FM broadcasting. RDS was developed
within the European Broadcasting Union (EBU)
and is available in most European countries. Each
time the button is pressed, the display changes from
RT (radio text) to PTY (program type) to TP (trafc
program) and then back to RT again.
G
Tuning button [62]
Use these buttons to change the tuner frequency.
The tuner frequency is displayed in the front display
and it can be changed in 50 kHz increments for FM
and 9 kHz increments for AM. When a station is
tuned into, > < will appear in the front display
(When the stereo signal is received,
will appear).
H
Preset button [63]
When AM or FM is selected as the input source,
press one of these buttons to jump to a radio station
that you preset using the [Memory] button. Pressing
the right button moves from the most recently preset
station to older ones, and pressing the left button
moves in the reverse order.
I
Tuning Mode button [62, 63]
This button is used to select the Auto or Manual
Tuning Mode.
J
Memory button [63]
Press to assign the radio station, to which you are
currently tuned, as a preset channel or press to
delete a previously preset station.
K
Setup /[ ]/[ ]/Enter/[ ]/[ ]/Exit [90]
These buttons are used with the On Screen Display
(OSD) menu.
Setup:
Press to bring up the OSD menu.
Exit:
Press to exit the OSD menu when at the Menu
Screen, or move to one screen previous to the one
that is displayed if at any other screen.
and
: When selecting items in the OSD menu,
press these buttons to move the on-screen cursor (or
the highlighted portion) upward and downward.
and
:
When setting parameters in the OSD
menu, press these buttons to select parameter values
or modes.
Enter:
Press to display the screen for the selected
item in the OSD menu.
Note for European models:
These buttons are also used to set programs and
nish scans when performing a PTY or TP scan
with the RDS broadcasts.
L
Phones jack [54]
This is a standard stereo jack for connecting stereo
headphones.
Getting Started
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo RDC-7.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo RDC-7.1 in the language / languages: English as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo RDC-7.1

Onkyo RDC-7.1 User Manual - German - 156 pages

Onkyo RDC-7.1 User Manual - Dutch - 156 pages

Onkyo RDC-7.1 User Manual - French - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info