64965
51
Zoom out
Zoom in
Previous page
1/160
Next page
En-51
Troubleshooting—Continued
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn’t preset all stations, or
the FM ST indicator doesn’t light up when tuned to a stereo FM station.
Check the antenna connections (see pages 16 and 17).
Change the position of the antenna (see page 32).
•Move the CBX-300 away from a nearby TV or computer.
Cars or airplanes can cause noisy interference.
The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.
Switch to Mono mode and listen in mono. The FM ST indicator will go off (see page 32).
When listening to an AM station, noise may be heard when you operate the remote controller.
If none of the above improves the reception, install an outdoor antenna (see page 17).
If a power outage occurs or the power cable is disconnected.
If there’s no power for a long time, the radio presets will be lost. In this case, preset them again (see pages 33 and 34).
Can’t adjust the frequency of the radio.
Use the remote controller’s TUNING [ ]/[ ] buttons to change the frequency of the radio (see page 32).
RDS doesn’t work.
The FM station you are tuned to doesn’t support RDS.
The radio signal is weak. Change the position of the antenna. If that doesn’t work, install an outdoor FM antenna (see
page 17).
The remote controller doesn’t work properly.
Replace the battery with a new one.
The remote controller is too far away from the CBX-300, or there’s an obstacle between them (see page 12).
The CBX-300’s remote control sensor is being subjected to bright light (inverter-type fluorescent light or sunlight).
The CBX-300 is located behind the tinted glass doors of a audio rack or cabinet.
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer. If the turntable doesn’t have a phono equalizer built-in, you
must provide one.
The timers don’t work.
Make sure the clock has been set correctly (see page 40).
•Timed operation will fail if the CBX-300 is on at the specified On time, so make sure it’s set to Standby (see page 44).
The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 42).
If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled and
the CBX-300 won’t turn off at the specified Off time (see page 44).
Make sure the timer is set to suitable volume setting (see page 44).
Tuner
Remote Controller
External Components
Timers
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CBX-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CBX-300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CBX-300

Onkyo CBX-300 User Manual - German, Italian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info