64965
52
Zoom out
Zoom in
Previous page
1/160
Next page
En-52
Troubleshooting—Continued
The clock displays --:--
•A power outage has occurred and the time setting lost. Set the clock again (see pages 19 and 40). The timers will all
be set to Timer Off, so you’ll need to turn on any necessary timers (see page 45). The timer settings will be preserved.
The time is not displayed in Standby mode.
Set the CBX-300 so that the time is displayed in Standby mode (see page 40).
AccuClock appears on the display frequently or the clock is not set properly.
Make sure the AccuClock function is correctly configured for use with a specific station (see page 41).
The signal from the station that the AccuClock function is configured to use is weak. Try another station (see page 41).
The station that the AccuClock function is configured to use is not broadcasting CT (Clock Time) information or does
not support RDS. Try another station (see page 41).
The AccuClock function cannot set the clock. Set the clock manually (see page 40).
Once a power outage has been fixed, the AccuClock function will run automatically.
AccuClock no longer works after moving the CBX-300 or antenna.
In step 4 of the “AccuClock with a Specific Station” procedure on page 41, try pressing the [CLEAR] button to change
the display to “FM---.--MHz,” and then press the [YES/MODE] button.
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
You want to turn off the AccuClock function.
Set the clock manually (see page 40).
“RESET” appears on the display when the power cord is plugged in.
The power cord has been disconnected for a long time, or a prolonged power outage occurred. All settings have
reverted to their factory defaults, so you’ll need to make any necessary settings again.
Clock
Others
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure that the material will be recorded correctly.
The CBX-300 contains a microcomputer. In very rare situations, severe interference, noise from an external source,
or static electricity may cause it to malfunction or lockup. In the unlikely event that this should happen, unplug the
power cord, wait at least 10 seconds, and then plug it back in again. If this doesn’t resolve the issue, reset the CBX-300
to its factory defaults (see page 49).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CBX-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CBX-300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CBX-300

Onkyo CBX-300 User Manual - German, Italian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info