64965
49
Zoom out
Zoom in
Previous page
1/160
Next page
En-49
Troubleshooting
If you have any trouble using the CBX-300, look for a solution in this section.
Can’t turn on the CBX-300.
Make sure that the power cord is properly plugged into the wall outlet (see page 19).
Make sure that the power cord is properly plugged into the CBX-300’s AC INLET (see page 19).
Unplug the power cord from the wall outlet, wait 5 seconds or more, then plug it in again.
The CBX-300 turns off unexpectedly.
If the sleep timer has been set and the SLEEP indicator is shown on the display, the CBX-300 will turn off automat-
ically after a specified period (see page 47).
When timed playback finishes, the CBX-300 automatically switches to Standby mode (see pages 42 to 45).
There’s no sound.
Make sure the CBX-300’s volume is not set too low (see page 20).
Make sure the correct input source is selected (see page 20).
Make sure the CBX-300 is not muted (see page 21).
Check all connections and correct as necessary (see pages 16 to 19).
While headphones are connected, the internal speakers output no sound (see page 20).
The sound quality is not good.
Make sure all audio connecting plugs are pushed in all the way (see page 18).
The sound quality can be affected by strong magnetic fields, such as that from a TV. Try moving any such devices
away from the CBX-300.
If you have any devices that emit high-intensity radio waves near the CBX-300, such as a cellular phone that’s being
used to make a call, the CBX-300 may output noise.
The CBX-300’s precision drive mechanism may emit a faint hissing sound while reading discs during playback or
when searching for tracks. You may be able to hear this noise in extremely quiet environments.
Audio output is intermittent when the CBX-300 is subjected to vibration.
The CBX-300 is not a portable device. Use it in a location that’s not subject to shock or vibration.
Headphone output is intermittent or there’s no sound.
This may be due to dirty contacts. Clean the headphones plug. See your headphones’ instruction manual for cleaning
information. Also, make sure that the headphones cable is not broken or damaged.
Power
Audio
If you can’t resolve the issue yourself, try resetting the CBX-300 before contacting your Onkyo dealer.
To reset the CBX-300 to its factory defaults, unplug the
power cord, and while holding down the CBX-300’s
[STANDBY/ON] button, plug the power cord back into the
wall outlet. “RESET” will appear on the display and the
CBX-300 will enter Standby mode.
Note that resetting the CBX-300 will delete your radio presets and custom settings.
Plug into a
suitable wall
outlet
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CBX-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CBX-300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo CBX-300

Onkyo CBX-300 User Manual - German, Italian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info