Manual One for All URC-8820N (page 12 of 34) (English)

492802

Zoom out

Zoom in

1/34

Programming Favorite Channel Scan

In the TV, VCR, DVD, and CBL/SAT modes, you can store a list of

up to 10 favorite channels, in any order, that will be immediately

scanned when you press FAV (see “Using Channel Scan”).

NOTE: Only channels of one mode can be stored for Favorite

Channel Scan.

1. On the remote control, press TV, VCR, DVD, or CBL/SAT once.

2. Press and hold SET until the LED (red light) blinks twice, then

release SET.

3. Enter 9 9 6. The LED will blink twice.

4. Use the keypad to enter a favorite channel number (e.g., 031).

Then press SET once.

NOTE: If the original remote control required pressing an

ENTER key to change the channel, also press the ENTER key

after the channel number (e.g., 0 3 1 ENTER).

5. If desired, repeat step 4 (in this section) for each favorite

channel to be stored, up to a total of 10 channels.

NOTE: If you try entering more than 10 channels, the remote

control will automatically exit programming.

6. To exit programming, press and hold SET for 3 seconds. The

LED will blink twice.

Re-Assigning Device Keys

You can set this remote to control a second TV, VCR, DVD player,

or other device. For example, to control a TV, a cable box, and two

DVDs, you will need to re-assign the AUX key to operate the second

DVD as follows:

1. On the remote control, press and hold SET until the LED (red

light) blinks twice, then release SET.

2. Enter 9 9 2. The LED will blink twice.

3. Press DVD once, then press AUX once.

4. The AUX key is now ready to be programmed for your second

DVD. See “Setting Up Your Components.”

To re-assign other device keys to the AUX key, repeat steps 1

through 4 by substituting the sequence from the following chart:

To Re-Assign Device Perform Sequence

AUX as 2nd TV key: SET - 9 - 9 - 2 - TV - AUX

AUX as 2nd VCR key: SET - 9 - 9 - 2 - VCR - AUX

AUX as 2nd CBL/SAT key: SET - 9 - 9 - 2 - CBL/SAT - AUX

AUX as 2nd CD key: SET - 9 - 9 - 2 - CD - AUX

AUX as 2nd PVR key: SET - 9 - 9 - 2 - PVR - AUX

AUX as 2nd AUD key: SET - 9 - 9 - 2 - AUD - AUX

You can also re-assign another unused device key by substituting

an open key for the AUX key in the above chart and performing

the sequence. For example, to re-assign an unused CBL/SAT key

as a 2nd CD key, perform SET - 9 - 9 - 2 - CD CBL/SAT. When a re-

assignment is done, the LED (red light) will blink twice to conﬁrm

your choice. At that time, you will need to program the remote

control for the new device (see “Setting Up Your Components”).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-8820N in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-8820N Manual

Product: