569308

Olympia OM 9812 Manual

26
Zoom out
Zoom in
Previous page
1/154
Next page
Level one function Level two function Level three function Summary of setting Default setting Page
B. User Settings 2.Fax Settings 03.# of Rings Number of rings before your machine answers. Two times 4.4
04.Redial Number of times and interval for automatic fax redialling. Two times
4.5
Three minute
05.Dialling Pause Dialling pause length. Two times 4.5
06.Memory Tx On/Off setting for Memory transmission. On 4.2
07.Quick Memory Tx On/Off setting for Quick Memory transmission. On 4.2
08.TTI Tx On/Off setting for sending your TTI. On 4.2
09.ECM Mode On/Off setting for ECM mode. On 4.1
10.Block Junk Fax Reject the fax reception from unauthorized incoming faxes. Off 3.54
11.Security Rx Keep all received fax messages in memory and after print them. Off 3.50
12.PIN Mode Prevent unauthorized long-distance calls. Off 3.52
13.Passcode Enter passcode for limiting polling access. — 3.16
14.Rotate Rx
On/Off setting for Rotate Rx. Off 4.4
(for OM 9816 only)
for OM 9812
14.Audible alarm When your machine receives a fax message, it will sound the
Off 3.24
for OM 9816
15.Audible alarm alarm tone.
3.Copy Settings 01.Scan Parameters You can set the following settings for copying.
• Primary document type Text 4.6
• Primary contrast mode Normal
02. Print parameter You can set the margin for copying. 24 mm 4.6
03.Auto Reset Time Set the time (minutes) of resetting the copy parameters. 3 minutes 4.7
04.Copy Auto Set the default setting to “Auto” for one of the following:
Paper size 4.7
• Paper size • Reduce/Enlarge ratio • Document size
05.Copy Protect On/Off setting for Copy protection. Off 2.18
06.Sort Copy On/Off setting for Sorting copy On 2.16
07.Nega/Posi On/Off setting to reverse copy of black and white areas. Off 2.16, 4.7
08.Combine
On/Off setting to combine. Off 2.17, 4.7
(for OM 9816 only)
4.Printer Settings 01.TCP/IP*
3
Enter the IP Address, Subnet mask and Gate way address. — —
5.Scanner Settings*
4
01.Scan Parameter Enter the scanning parameters. — —
02.Scan Size Set the scanning size. — —
03.Auto Reset Set the time (minutes) resetting the scan parameters. — —
1.15
Getting started
*3: This option appears only if the optional NIC (network interface card) has been installed.
*4: Refer to the Driver’s manual included in the Printer driver CD-ROM.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia OM 9812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia OM 9812 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info