Manual Olympia A 2048 (page 20 of 62) (English, German, Dutch, French, Italian, Spanish)

569126

Zoom out

Zoom in

1/62

7. When you have finished your laminating tasks, press the On/Off button

on the operating panel to switch the device off. Switch off the power

switch on the rear side of the device. Also disconnect the power plug,

particularly when the device will remain out of operation for a longer pe-

riod.

Clearing Foil Jams

The laminator is provided with a reversing function in order to clear foil jams

quickly.

1. If the foil jams, press the Reverse button

2. The jammed foil is released and is fed out at the laminator infeed slot.

3. It will probably be necessary to then clean the unit several times as de-

scribed in the Section "Cleaning and Servicing".

4. If foil jams occur repeatedly or jammed foil cannot be removed from the

laminator, please contact the sales outlet where you purchased the de-

vice (refer to Guarantee).

Cleaning and Servicing

Deposits and residual adhesive on the transport rollers can influence the re-

sults of the laminating process. Therefore, the transport rollers must be

cleaned regularly after use:

To do this, insert a folded piece of paper in the infeed slot. Residual adhe-

sive is removed and taken up by the paper when ejected. Repeat the proc-

ess several times.

Disconnect the power plug before starting to clean the unit with a damp

cloth. If necessary, the housing can be cleaned using a cloth moistened with

clean water with a little mild soap applied. Never use any solvents or ag-

gressive cleaning agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 2048 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia A 2048 Manual

Product: