Manual Olympia A 2048 (page 18 of 62) (English, German, Dutch, French, Italian, Spanish)

569126

Zoom out

Zoom in

1/62

Cold Laminating

1. Connect the power cable to an easily accessible, standard electrical

socket.

Attention: Check that the voltage specifications of the machine corre-

spond to that of your power supply network

(220-240 V / 50 Hz).

2. Switch on the power switch on the rear side of the device.

3. Press the On/Off button on the operating panel to switch the device on.

The drive motor for the transport rollers starts up.

4. Press the button for selecting cold/hot laminating and foil thickness, sev-

eral times if necessary, until the COLD LED lights up in the operating

panel. The LED strip lights up blue, continually, when the device is

ready for use.

Attention: If you have just finished using the laminator for hot laminat-

ing, you must let the laminator cool down. The equipment

takes about 30 minutes to cool down. The LED strip flashes

red during the cool down phase.

5. Insert the document to be laminated in the foil pocket so that there is a

margin of approx. 3-5 mm to the edge of the foil on all sides.

6. Insert the foil pocket containing the document in the laminator's infeed

slot. Insert the ready closed side of the foil in first. The laminating pro-

cess occurs automatically.

Note: To prevent the foil pocket from creasing, never feed the

open side of the laminating pocket first in the infeed slot of

the laminator.

Note: If the device remains unused for 30 minutes, it switches off

automatically. Press the On/Off button on the operating

panel to switch the device on again.

7. When you have finished your laminating tasks, press the On/Off button

on the operating panel to switch the device off. Switch off the power

switch on the rear side of the device. Also disconnect the power plug,

particularly when the device will remain out of operation for a longer pe-

riod.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olympia A 2048 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olympia A 2048 Manual

Product: