812276

Olsberg Merapi Manual

16
Zoom out
Zoom in
Previous page
1/40
Next page
16
Heating during the transition period
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
●Open the combustion air slide valve complete.
●Only put on a small quantity of fuel.
●Frequently stoke the ash.
Cladding
●The cladding may not be overheated, as cracks
could appear.
●Use a maximum of 3 kg wood or briquette for heating.
●As the natural cladding comes from a „grown“ boul-
der, structure and colour scheme may be very
different.
●The surface may be altered under temperature
inuence.
Special information
The manufacturer’s guarantee expires if the stove is
signicantly or permanently overloaded above the
nominal heating output, or if fuels other than those list-
ed are used.
●The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a re-
proof, non-combustible container.
●Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
●Convection air openings may not be covered.
● Never use white spirit, benzene or other inamma-
ble, hazardous materials to ignite the re.
● The combustion air supply ttings must never be al-
tered. In particular, it must be ensured that any nec-
essary combustion air pies are open while the re-
place is being used.
● Do not make any changes or modications to the
stove.
Cleaning
What? How often? Using what?
inside of stove at least 1 x per year hand brush,
vacuum cleaner
connection piece at least 1 x per year hand brush,
vacuum cleaner
glass panel as required
when cold
using glass cleaner for
stoves- and oven glasses
painted surfaces as required when cold
with a slightly damp microbre cloth
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Merapi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Merapi in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info