812276

Olsberg Merapi Manual

17
Zoom out
Zoom in
Previous page
1/40
Next page
17
Measuring negative pressure
in the combustion chamber
Above the combustion chamber opening there is a
measuring duct on which the negative pressure in the
combustion chamber can be measured with the door
closed during heating operation.
measuring duct
Replacement parts
Attention:
Please ask your specialist trader for any replacement
parts required. Always use original spare parts only.
We guarantee a ten-year availability of spare parts.
In order to process your order as quickly as possible, it
is imperative that you send us the type and fabrication
number given on the stove’s type plate.
The type plate is situated on the back panel.
We recommend the relevant numbers here before in-
stalling the stove to ensure that you always have them
to hand:
Type number: 23/__________
Fabrication number: __________________________
What to do if ...?
... the stove doesn’t draw properly?
●Is the chimney or the stovepipe not tight?
●Has the chimney been incorrectly designed?
●Is the external temperature too high?
● Are the doors of other replaces connected to the
chimney open?
... the room doesn’t get hot?
●Is the heating requirement too high?
●Is the waste gas pipe blocked?
●Is the combustion air supply been closed?
●Is the chimney draught too low?
●Is the wood used as fuel not dry?
... the stove gives off too much heat?
●Is the combustion air supply open too wide?
●Is the delivery pressure too high?
... the grate becomes damaged or slags are formed?
●The stove was overloaded.
●The ash pan was not emptied in good time.
... a fault occurs?
●Do not add any more fuel.
●Do not open the combustion chamber door.
● Allow the re in the chimney to burn itself out in a
controlled fashion.
... the chimney catches re?
● Minimize the air supply to the stove and call the re
department.
●Inform the chimney sweep.
●Have a professional determine the cause?
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg Merapi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg Merapi in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info