16646
24
Zoom out
Zoom in
Previous page
1/65
Next page
17
ENGLISH
Setting the Time
Proceed as follows to set the correct time in the hour:minutes format:
1. Slide the control switch to the PRG position.
2. Type the [current time] using the HH:MM format.
NOTE: Time is set according to international, or military time
(24-hour clock format). To correctly enter this time, simply add
12 to all hours in the PM. For example, to set the time to 9:00
AM, type [0900]; to set the time to 2:15 PM, type [1415].
3. Press the [Qty/Time] key to store the entered time.
4. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example: Set the time at 3:30 PM.
Type/Press:
[1530] + [Qty/Time]
NOTE: If you wish that the time just entered be printed and displayed in
the 24-hour format, type [40] and then press the [RA/
] key.
More information on how to change the cash register's basic
programming is explained in the section Programming System
Options.
Percent Discount (-%)
Setting this option automatically calculates the preset rate each time the
[-%] key is pressed. The percentage rate can be discounted from an
individual item or from a sales transaction total.
Setting a Percent Discount (-%) Rate
Proceed as follows to define a standard discount rate:
1. Slide the control switch to the PRG position.
2. Type the [numbers] representing the desired percentage rate. Up to
four digits ranging from 0 to 99.99 can be used, and you MUST enter
a total of four digits, two before and two after the desired decimal
place. For example, to enter 10%, type [1000], to enter 6.5% type
[0650].
3. Press the [-%] key to store the rate.
4. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example: Program a standard 10% discount rate.
Type/Press:
[1000] + [-%]
Decimal Point Position
The decimal point setting is preset to the x.xx format. This format can be
changed, as needed, to one of the other settings below.
Changing the Decimal Point Position
Proceed as follows to define a new position for the decimal point.
1. Slide the control switch to the PRG position.
2. Type [1] followed by the status number [0, 1, 2 or 3] to select the
desired format as indicated in the following table:
Status Number Format
0x
1 x.x
2 x.xx
3 x.xxx
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR5200 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR5200

Olivetti ECR5200 User Manual - German - 72 pages

Olivetti ECR5200 User Manual - French - 70 pages

Olivetti ECR5200 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info