42378
28
Zoom out
Zoom in
Previous page
1/82
Next page
21
ENGLISH
Value Added Tax (VAT) Rates
Up to four VAT rates (VAT 1, VAT 2, VAT 3 and VAT 4) can be preset
in the cash register. A maximum 5-digit VAT rate can be programmed
(0-99.999%).
Setting a Fixed VAT Rate
Proceed as follows to program a fixed tax rate:
1. Turn the PRG key to the PRG position.
2. Type the [numbers] which represent the VAT (1 for VAT 1, 2 for
VAT 2, 3 for VAT 3 and 4 for VAT 4).
3. Press the [Tax Set] key. The message "VAT n RATE" appears on the
operator display where n is the number representing the VAT rate.
4. Type the VAT rate. Up to five digits can be used, and you MUST
enter three digits after the desired decimal place. For example, to
enter a 5.5% VAT rate, type [5500]; to enter a 16% VAT rate, type
[16000].
5. Press the [Amt Tend/TOTAL] key.
6. Program another feature or exit program mode by turning the PRG
key to the OFF position.
Example: Set a VAT 1 rate of 5.5%, VAT 2 rate of 7%, VAT 3 rate of
16% and a VAT 4 rate of 20%.
Type/Press:
[1] + [Tax Set] + [5500] + [Amt Tend/TOTAL]
[2] + [Tax Set] + [7000] + [Amt Tend/TOTAL]
[3] + [Tax Set] + [16000] + [Amt Tend/TOTAL]
[4] + [Tax Set] + [20000] + [Amt Tend/TOTAL]
NOTE: The programmed VAT rates are identified on the sales receipt
with the following printed symbols: TI for VAT 1, TII for VAT
2, TIX for VAT 3 and TIIZ for VAT 4.
High Digit Lock Out (HDLO) and Tax Status
Assigned to the Minus Key (-)
You can limit the number of digits, i.e. the maximum value of a
minus key operation, from 1 to 7 digits. This makes sure that minus key
amounts do not exceed a maximum amount. You can also assign a VAT
rate or a non tax status to the minus key. Make your selections for this
feature from the following options:
High Digit Lock Out Taxation
0 = 7 digits (99999.99) 00 = Non taxable
1 = 1 digit (0.09) 01 = VAT 1
2 = 2 digits (0.99) 02 = VAT 2
3 = 3 digits (9.99) 03 = VAT 3
4 = 4 digits (99.99) 04 = VAT 4
5 = 5 digits (999.99)
6 = 6 digits (9999.99)
Programming the High Digit Lock Out and Tax Status
1. Turn the PRG key to the PRG position.
2. Type the HDLO code [0-6].
3. Type the tax status code [00-04].
4. Press the [-] key.
5. Program another feature or exit program mode by turning the PRG
key to the OFF position
Example: Allocate a maximum of 5 digits and VAT 2 to the minus key.
Type/Press:
[5] + [02] + [-]
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR2350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR2350 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info