452056
23
Zoom out
Zoom in
Previous page
1/59
Next page
15
ENGLISH
4. Enter the letters or characters of the string you wish to
define and then press . You are now prompted to
identify the following foreign currency.
5. Repeat steps 3 and 4 if you wish to assign a descriptor
to the remaining foreign currencies, if defined.
6. Press
to exit.
Example: Name foreign currency 1 "EURO" by using the
CAPS character table.
Type/Press:
Rounding Option for Swiss, Danish,
Swedish and EURO Currencies
For the Swiss franc, Danish krone, Swedish krona and Euro
currencies, you can program the machine to so that the
amount of a transaction is automatically rounded accordingly
whenever the
, or a [tender] key is pressed. The
rounded result will be displayed on the operator and client
displays, printed on the customer receipt and journal report.
The total adjustments are indicated on the financial reports.
Setting the Rounding Option
With reference to the section "System Options", by setting
system option 21 to the related value (1, 2, 3 or 4), you can
program the machine to round off the subtotal or tender
values of the related currency.
Decimal Point Position
1. Control lock key position: PRG.
2. Type the status number [0, 1, 2 or 3] to select the desired
format as indicated in the following table:
Status Number Format
0x
1 x.x
2 x.xx (default setting)
3 x.xxx
3. Press
to set the new format.
Example: Program the cash register so that three digits
are left after the decimal point.
Type/Press:
Status number
Status number
Switch to foreign currency definition mode
Confirm entered
foreign currency
descriptor
Exit
New descriptor entry
Fraction Rounding for VAT Calculation
Fraction rounding is used to round figures with decimals up
or down to the nearest whole numbers and is used for
percent tax and percent discount calculations.
Choose from the following three options to select the round-
ing as needed:
Status Number Fraction Rounding
0 a fraction of a pence is rounded down
one pence
50 a fraction under one-half pence is
rounded down one pence, a fraction
above one-half pence is rounded up
one pence (default setting)
99 a fraction of a pence is rounded up
one pence
1. Control lock position: PRG.
2. Type the status number [0, 50 or 99] to select the desired
fraction rounding.
3. Press
to store the new setting.
Example: Program the rounding code so that a fraction
under one-half pence is rounded down one pence, a
fraction above one-half pence is rounded up one pence.
Type/Press:
Printing VAT Information on Customer
Receipts
You can program the cash register to print VAT information
on the customer receipt according to your business' or
country's requirements.
Programming the Cash Register to Print the
Required VAT Information
With reference to the section "System Options", by setting
system options 70 to 77 you program the cash register to
print the VAT information that you need.
1. Control lock key position: PRG.
2. Type the [system option number] followed by status
number
, then press .
3. Turn the control lock key to the OFF position.
Receipt With Sum of all VAT Amounts Calculated
(TL-VAT) - System Option 71
Sum of the
individual VAT
totals
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 6920F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 6920F in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR 6920F

Olivetti ECR 6920F User Manual - Dutch - 59 pages

Olivetti ECR 6920F User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info