624806
22
Zoom out
Zoom in
Previous page
1/64
Next page
15
ENGLISH
NOTE: Program all the desired features at the same time in order to
create a single receipt of all selections. Keep the receipt in a
safe place for future reference.
Making Changes to Cash RegMaking Changes to Cash Reg
Making Changes to Cash RegMaking Changes to Cash Reg
Making Changes to Cash Reg
ister Prister Pr
ister Prister Pr
ister Pr
ogrammingogramming
ogrammingogramming
ogramming
Once the cash register is programmed to satisfy your specific needs,
there is no need to reprogram the entire machine to make single
program changes or corrections. If you wish to make a change (such as
an update to VAT rates, PLUs or Euro exchange rates), be sure you are
in the program mode, re-do the program in question and finalize when
you are ready to exit the programming mode. A new program entry will
automatically overwrite a previous entry for the same program.
EnterEnter
EnterEnter
Enter
ing the Pring the Pr
ing the Pring the Pr
ing the Pr
ogram Modeogram Mode
ogram Modeogram Mode
ogram Mode
To enter into the program mode, unlock, open and remove the printer
compartment cover and then slide the control switch to the PRG
position. Refit the printer compartment cover.
Exiting the PrExiting the Pr
Exiting the PrExiting the Pr
Exiting the Pr
ogram Modeogram Mode
ogram Modeogram Mode
ogram Mode
To exit the program mode, open the printer compartment cover and
slide the control switch to the R1 or R2 position if you wish to carry out
sales transactions, to the X or Z position if you wish to take
management reports, or to the OFF position if you wish to exit.
ClearClear
ClearClear
Clear
ing Erring Err
ing Erring Err
ing Err
oror
oror
or
ss
ss
s
To clear an error made during the programming phase, simply press
the [C] key. The error tone ends, the display clears and the keypad
unlocks.
If the message "SEC Code" is displayed, this means that a PRG and Z
mode security password was programmed. Enter the 4-digit code
followed by the [Charge] key to continue.
In case an error condition cannot be cleared, perform one of the two
general clearance methods explained in the section entitled General
Clearance. Remember that the second general clearance sets all
counters and totals to zero, and cancels all features programmed.
ClerCler
ClerCler
Cler
k Numberk Number
k Numberk Number
k Number
s and Secrs and Secr
s and Secrs and Secr
s and Secr
et Codeset Codes
et Codeset Codes
et Codes
Clerk codes are a special security feature to control access to the
register. You can program up to 6 individual clerk numbers linked to
secret entry codes of three digits each.
PrPr
PrPr
Pr
ogramming a Secrogramming a Secr
ogramming a Secrogramming a Secr
ogramming a Secr
et Code Linket Code Link
et Code Linket Code Link
et Code Link
ed to a Clered to a Cler
ed to a Clered to a Cler
ed to a Cler
kk
kk
k
NumberNumber
NumberNumber
Number
1. Open the printer compartment and slide the control switch to the
PRG position.
2. Activate the clerk system by typing [44444] followed by [1] and
then pressing the [Amt Tend/TOTAL] key.
3. Type [444444] and press the [Amt Tend/TOTAL] key.
4. Type a number to identify the clerk which the secret code will be
linked.
5. Set a three-digit secret code by typing three [numeric keys].
6. Press the [Clerk] key.
Repeat the above operations (from step 3 to step 6) to assign a secret
code to the remaining 5 Clerks or use the [C] key to exit from Clerk
Secret Code programming.
If you wish to change the clerk's secret code and the Clerk system is
already activated, there is no need to perform step 2 above.
Example: Assign secret code 106 to Clerk 1 for the first time.
Type/Press:
[44444] + [1] + [Amt Tend/TOTAL] + [444444] + [Amt Tend/TOTAL]
+ [1106] + [Clerk]
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2100 Euro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2100 Euro in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info