624806

Olivetti ECR 2100 Euro Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
16
DeactivDeactiv
DeactivDeactiv
Deactiv
aa
aa
a
ting the Clerting the Cler
ting the Clerting the Cler
ting the Cler
k Systemk System
k Systemk System
k System
Proceed as follows if for any reason you wish to deactivate the Clerk
system, in other words if you no longer want to enter a clerk number
and related secret code to perform sales transactions.
1. Open the printer compartment and slide the control switch to the
PRG position.
2. Type [44444] followed by [0] and then press the
[Amt Tend/TOTAL] key.
3. Slide the control switch to your operating mode and then close the
printer compartment cover.
EnterEnter
EnterEnter
Enter
ing a Clering a Cler
ing a Clering a Cler
ing a Cler
k Number/Secrk Number/Secr
k Number/Secrk Number/Secr
k Number/Secr
et Code Befet Code Bef
et Code Befet Code Bef
et Code Bef
oror
oror
or
e Cashe Cash
e Cashe Cash
e Cash
RegReg
RegReg
Reg
ister Operaister Opera
ister Operaister Opera
ister Opera
tionstions
tionstions
tions
Proceed as follows to enter a defined Clerk number and related secret
code before using the cash register in the REG operating mode.
1. Open the printer compartment and slide the control switch to the R1
or R2 position.
2. Type a Clerk number [1, 2, ... or 6].
3. Type the corresponding three-digit code.
4. Press the [Clerk] key.
The clerk number indicator light will display a line (_) to indicate the
clerk number that is in use (CL 1 ...CL 6) and that it is now possible to
carry out transactions. The clerk number is printed on the sales receipt
and on the management reports.
DaDa
DaDa
Da
te and te and
te and te and
te and
TimeTime
TimeTime
Time
Set the date to print the current date at the top of each receipt, journal
record or management report. The date will print in the
day/month/year format unless otherwise programmed as explained in
the section entitled Programming System Options.
Set the time to print the current time at the bottom of the receipt. The
time prints in the hour:minutes format and by default assumes the 12-
hour format. You can display the time by pressing the [Qty/Time] key
when the cash register is in the R1 or R2 mode.
The date and time change automatically as long as the cash register is
plugged into the wall outlet or the battery back-up system remains
active.
Setting the DaSetting the Da
Setting the DaSetting the Da
Setting the Da
tete
tete
te
Proceed as follows to set the current date:
1. Slide the control switch to the PRG position.
2. Type the [numeric keys] representing the current date. Remember
to use the DDMMYY format. Single digit numbers for months and
days must be preceded by a zero (0).
3. Press the [#/NS] key to store the date.
4. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example: Set a date of October 3, 1998.
Type/Press:
[031098] + [#/NS]
NOTE: If you wish that the date just entered be printed in the month/
day/year format, type [70] and then press the [RA/
] key.
More information on how to change the cash register's basic
programming is explained in the section Programming System
Options.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2100 Euro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2100 Euro in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info