624806

Olivetti ECR 2100 Euro Manual

20
Zoom out
Zoom in
Previous page
1/64
Next page
13
ENGLISH
8. Pass the edge of the customer receipt through the receipt window on
the compartment cover.
9. Reposition, close and lock the printer compartment cover.
QuicQuic
QuicQuic
Quic
k Stark Star
k Stark Star
k Star
tt
tt
t
Quick Start is a brief but complete start-up procedure that allows you
to begin using your new cash register as quickly as possible. Carefully
follow the steps listed below:
1. Make sure cash register is plugged into a grounded power outlet.
2. Open the printer compartment cover and slide the control switch to
the PRG position.
3. Set the current date in the day/month/year format by typing the
corresponding numeric keys and then pressing [#/NS]. Single digits
must be preceded by a zero. For example, to set October 3, 1998,
type [031098] and then press the [#/NS] key to store your entry.
If you wish that the date just entered be printed in the
month/day/year format, type [70] and then press the [RA/
] key.
4. Set the current time using the 24-hour (military) format and then
pressing [Qty/Time]. Also in this case single digits must be
preceded by a zero. For example, to set 1:05 P.M., type [1305] and
then press the [Qty/Time] to store your entry. To set 9:15 A.M.,
type [0915] and then press [Qty/Time]. By default the time is
displayed and printed in the 12-hour format.
If you wish that the time just entered be displayed and printed in the
24-hour format, type [40] and then press the [RA/ ] key.
5. Set the decimal point position. For example, to leave two digits
after the decimal point, type [1] [2] and then press the [RA/
] key.
6. Set the first of up to four possible fixed VAT rates. For example, to
set a VAT1 rate of 5.5%, type [1] and then press the [Non Tax] key,
type [5500] (three digits must be entered after the desired decimal
point) and then confirm with the [Amt Tend/TOTAL] key.
7. Program standard Department 1 as VAT1 to a single item price sale.
For example, to assign VAT1, single item cash sale and a price of
£3.00 to Department 1, type [1] [01] and then press [Check],
type [300] and then press [Department 1/7].
8. When programming is complete, exit the program mode by sliding
the control switch to the OFF position.
9. To ring up a sales, slide the control switch to the R1 or R2 position
(R1 winds a journal record on the spindle, R2 gives you customer
receipts through the window opening). Follow the instructions given
in the section entitled Transaction Examples. If clerk numbers are
programmed, be sure to enter the Clerk number followed by the
[Clerk] key in the R1 or R2 position before performing any sales
transactions.
To print management reports, slide the control switch to the X or Z
position as needed and then press the [Amt Tend/TOTAL] key.
Once you have mastered the Quick Start operations, you will
undoubtedly want to expand your use of the machine by studying other
sections of this manual and incorporating new programming into your
personalized cash management system. For example, other valuable
functions include Percent Discount Rate, Department Status, Price
Look-Ups (PLUs), Euro Conversions, and many more.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2100 Euro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2100 Euro in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info