Manual Olivetti ECR 2100 Euro (page 19 of 64) (English)

624806

Zoom out

Zoom in

1/64

5. Insert the edge of the paper into the paper slot as shown in the

figure.

6. Set the control switch to R1 or R2, press the [Feed] key and

manually feed the paper into the slot until the paper catches and

advances approximately six to ten inches above the print

mechanism.

NOTE: If the paper does not feed properly, check the alignment of the

paper in the slot and/or for the straight edge on the end of the

paper roll.

7. Replace journal winder with wheel to right of compartment. If you

are loading a journal record, slide edge of tape through slots on

journal winder spindle (depress the [Feed] key to advance

additional tape, if necessary). Manually roll winder toward back of

Loading PLoading P

Loading P

perper

per

Proceed as follows to load the cash register with paper.

1. Make sure the cash register is plugged into a grounded power

outlet.

2. Unlock, open and remove the printer compartment cover, then

remove the plastic journal winder spindle.

3. With a pair of scissors, cut the end of the paper tape to create a

straight, even edge so that the paper can be properly fed through the

print mechanism.

4. Set the paper roll in the bottom of the printer compartment so that

the paper feeds out from the bottom of the roll.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2100 Euro in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti ECR 2100 Euro Manual

Product: