644159
32
Zoom out
Zoom in
Previous page
1/202
Next page
28
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
Fasten the extension cable in the
corresponding cable holder (D, Fig.15)
each time before use.
EXTENSION CABLES RECOMMENDED
LENGHT (230 V)
Lenght
0 ÷ 20 metri
20 ÷ 50 metri
50 ÷ 100 metri
Minimum conductor section
1 mm
2
1.5 mm
2
4 mm
2
Required network voltage
230 V - With 10 A capacity and 8 A slowblow
safety fuse.
WARNING - Use of neoprene or double
insulation cables is recommended.
Cables should be fitted with safety plugs
for external use. Frequently check the plugs
and the extension cable and replace them if
damaged.
MOTOR START
- Before starting the motor, make certain the
power socket incorporates a residual current
device with a tripping current not greater than
30 mA.
- After connecting the plug to the mains, place
the electric saw on the ground so that the
chain is clear of any obstructions which could
prevent it from regularly sliding.
- Hold the handles firmly and first press the
safety button (A, Fig.16), then the on/off
switch (B).
WARNING - Keep bystanders and
animals out of the work area when
cutting with the electric saw.
WARNING - Press and hold the switch
completely down (B) during saw operation.
The electric saw do not run when the brake
lever (C) is engaged (Fig. 4).
BREAKING-IN THE CHAIN
Disconnect the plug from the network
before any servicing.
WARNING - In order for the chain to turn,
the accelerator lever must be pressed!
After several minutes of use / cutting, the chain
tension must be rechecked:
Stop the motor and disconnect the plug from
the mains socket;
Let the chain cool for several minutes;
Recheck the chain tension (see page 26 –
Chain tensioning)
Repeat this process until the chain retains
proper tension.
WARNING - Never touch the chain while
the motor is running. Do not touch the
ground with the chain.
WARNING - The electric saw will not
work when the brake lever is activated
(C, Fig. 4).
6. STOPPING THE ENGINE
Releasing the switch (B, Fig. 16) will immediately
shut down the chain, while the motor will stop
running due to inertia.
Do not put the electric saw on the
ground when the chain is still moving.
7. USE
SAFETY DEVICES
The electric saw is equipped with two separate
safety systems.
START SWITCH
When the start switch (B, Fig. 16) is completely
released, the chain stops immediately (for
maximum operator safety), while the motor
stops due to inertia.
CHAIN BRAKE
The chain brake ensures maximum safety in
using the electric saw. It protects the operator
from dangerous kickback which can occur
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oleo-Mac GS200E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oleo-Mac GS200E in the language / languages: English, German, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oleo-Mac GS200E

Oleo-Mac GS200E User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info