783009
48
Zoom out
Zoom in
Previous page
1/295
Next page
EN 48
CLEANING & CARE
Fig.
12
Switch the product into Standby before disconnecting it from the mains.
Note:
Clean the product every two weeks. Clean the outer surfaces of the
product with a damp cloth soaked in neutral detergent. Dry it with a
lint-free cloth. Do not use chemical, alkaline, abrasive or other aggressive
detergents as they might be harmful to the surfaces.
Fig.
13
Remove the air filters. Clean the air filters in warm water (below 40 °C)
and neutral detergent.
Fig.
14
Let them dry thoroughly before re-attaching.
Note:
• Run the product on FAN mode for 12 hours in a warm room to dry and
prevent mold.
• Do not open the housing of the product and do not insert any tools
into the air vents.
• This product does not contain any parts that can be repaired or
serviced by the consumer. Contact a qualified specialist to have it
checked and repaired as necessary.
DECOMMISSIONING
1. Drain all water from the product and dry it using the fan mode Fan for half a day
in a dry, warm room to prevent mold.
2. Switch the product into standby.
3. Unplug and fix the power cord with the cable tie to the back of the product.
4. Remove the exhaust hose assembly from the product.
5. Cover all drain outlets.
6. Remove the batteries from the remote control.
7. Close the cover of the wall adaptor.
Fig.
15
TRANSPORTATION
• The product is heavy. Therefore move the product whenever possible
by pushing or pulling it, rolling on the castors.
• When lifting is unavoidable, use the recessed handles and lift with two
people.
• Do not move the product during operation.
• Wait at least 2 hours after moving before operating the product to
avoid damages to the refrigerating circuit.
IM_OAC7020W_OAC7020B_200110_V06_HR.indb 48 10/1/2020 14:15
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OAC 7020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OAC 7020 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 16.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info