783009

OK OAC 7020 Manual

47
Zoom out
Zoom in
Previous page
1/295
Next page
EN
47
Pre-programming a function
By pushing the SHORTCUT button any function and temperature can be saved and
recalled.
1. Choose your desired function e.g. using the MODE, TEMP / + or / – and
FAN buttons, etc.
2. Press and hold the SHORTCUT button until the display flashes one time to save
the setting.
3. The preset setting can be recalled at anytime and from any mode by simply
pushing the SHORTCUT button.
Fig.
11
WATER DRAINAGE
Water is only collected during automatic AUTO, cooling Cool and
dehumidifying mode Dry.
• During dehumidifying mode Dry water is drained directly through
the upper drain outlet and the drainage hose must be continuously
connected. The water is drained through the hose into a suitable
container or nearby drain.
WARNING – Danger of flooding! Do not leave the product unattended
when draining to an external container! Empty the container frequently
to avoid spilling over and water damage.
• During automatic AUTO and cooling mode Cool water is collected in an
internal tank, which must be drained when full. In this case the product
will emit an audible signal, while the display on the control panel is
showing the protection code P1. The cooling process will stop until
the water is drained and the product restarted, while the fan remains
running.
1. Disconnect the product from the power supply.
2. Place the product with the lower drain outlet above a suitable
container or a drain.
3. Remove the cover of the lower drain outlet.
4. Attach the cover of the outlet again, when all water is drained.
5. Connect the plug to a suitable socket.
6. The product is ready to be switched on.
Drainage Dry Auto & Cool
Upper drain outlet
Internal tank
IM_OAC7020W_OAC7020B_200110_V06_HR.indb 47 10/1/2020 14:15
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OAC 7020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OAC 7020 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 16.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info