551851
22
Zoom out
Zoom in
Previous page
1/62
Next page
22
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
• A (hold) - to scroll upward through Set Points at a rate of 8 per sec from 0:10 to 3:00 (hr:min) in increments of 0:05 (:min).
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the Set A Menu.
FREE Mode has a separate EDT Alarm.
Set TLBG Alarm, information includes (Fig. 43, page 21):
> Graphic TLBG AL.
> Depth value flashing with MAX and FT (or M) icons.
• A (< 2 sec) - to step upward through Set Points from 1 to 4 segments one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the Set A Menu.
FREE Mode has a separate TLBG Alarm.
Set DTR Alarm, information includes (Fig. 44, page 21):
> Graphic DTR AL.
> Dive Time Remaining value (hr:min) flashing with Time (clock) icon.
• A (hold) to scroll upward through Set Points at a rate of 8 per sec from 0:00 to 0:20 (hr:min) in increments of 0:01 (:min).
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the Set A Menu.
SET U (UTILITIES) MENU
• S (< 2 sec) - to access Set U Menu while the selection Arrow icon ( > ) is next to Set U on the NORM (or GAUG) Menu.
• A (< 2 sec) - to step down (forward) through selections.
• M (< 2 sec) - to step up (back) through selections.
• S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
Selections for Wet Activation, Units, Algorithm, Conservative Factor, and Glo Duration also apply to FREE Dive Mode.
> To change any of these items while in FREE mode, use the Set U selection in the NORM Menu.
Set Wet Activation, information includes (Fig. 45):
> Graphic WET ACTIV.
> Set Point graphics ON and OFF, Arrow ( > ) icon next to the one previously saved flashing.
• A (< 2 sec) - to toggle Set Points.
• S (< 2 sec) - to save the setting and revert to the Set U Menu.
Set Units, information includes (Fig. 46):
> Graphic UNITS.
> Set Point graphics IMPERIAL and METRIC, Arrow ( > ) icon next to the one previously saved flashing.
• A (< 2 sec) - to toggle Set Points.
• S (< 2 sec) - to save the setting and revert to the Set U Menu.
Set Deep Stop, information includes (Fig. 47):
> Graphic DEEP STOP.
> Set Point graphics ON and OFF, Arrow ( > ) icon next to the one previously saved flashing.
• A (< 2 sec) - to toggle Set Points.
• S (< 2 sec) - to save the setting and revert to the Set U Menu.
Deep Stop applies only to NORM No Deco dives.
Set Safety Stop, information includes (Fig. 48A):
> Graphics SS (= Safety Stop).
> Set Point graphics OFF, ON, TMR ON; Arrow ( > ) icon next to ON or OFF, the one previously saved, flashing.
• A (< 2 sec) - to step forward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting.
>
If OFF or TMR ON is selected/saved, operation will revert to the Set U Menu.
>
If ON is selected/saved, the Set Stop Time/Depth screen is displayed with the Time digits flashing (Fig. 48B).
• A or M (< 2 sec) - to toggle between 3:00 and 5:00 (min:sec).
• S (< 2 sec) - to save the Time setting and flash the Depth digits.
• A (< 2 sec) to step forward through Depth Set Points of 10, 15, 20 FT (or 3, 4, 5, 6 M).
• M (< 2 sec) to step back through Set Points one at a time.
• S (< 2 sec) to save the SS Time/Depth setting and revert to the Set U Menu.
Safety Stop applies only to NORM No Deco dives.
Set Algorithm, information includes (Fig. 49):
> Graphic ALGORITHM.
> Set Point graphics Z+ and DSAT, Arrow ( > ) icon next to the one previously saved flashing.










** NORM only
Fig. 45 - SET WET ACTIV
Fig. 46 - SET UNITS
Fig. 47 - SET DEEP STOP
Fig. 48B - SET SAFETY STOP
(TIME & DEPTH)
Fig. 48A - SET SAFETY STOP
(TIMER)
Fig. 49 - SET ALGORITHM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OCS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OCS in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OCS

Oceanic OCS Quick start guide - English - 2 pages

Oceanic OCS Quick start guide - German - 2 pages

Oceanic OCS User Manual - German - 62 pages

Oceanic OCS Quick start guide - French - 2 pages

Oceanic OCS User Manual - French - 62 pages

Oceanic OCS Quick start guide - Italian - 2 pages

Oceanic OCS User Manual - Italian - 62 pages

Oceanic OCS Quick start guide - Spanish - 2 pages

Oceanic OCS User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info