551851

Oceanic OCS Manual

21
Zoom out
Zoom in
Previous page
1/62
Next page
21
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
• A (< 2 sec) - to step upward through FO2 Set Points.
• M (< 2 sec) - to step back through FO2 Set Points.
• S (< 2 sec) - save the FO2 setting and flash the PO2 digits (Fig. 38, page 20), or revert to SURF MAIN if Air.
• A (< 2 sec) - to step upward through PO2 Alarm Set Points from 1.20 to 1.60 (ATA) in .05 increments.
• M (< 2 sec) - to step back through PO2 Set Points.
• S (< 2 sec) - to save the PO2 setting and access Set Gas 2.
• S (2 sec) - to revert to Set F displaying the settings.
• M (2 sec) - to revert to SURF MAIN, or if no button is pressed during a 2 minute period.
SET GAS 2 FO2/PO2, information includes:
> Max Depth allowed for the PO2 Alarm setting displayed, blank when Air.
> Graphic GAS2.
> Graphic FO2 with setting OFF, Air, or 21 to 100 flashing (Fig. 37A/B, page 20).
> Graphic PO2 with Alarm value set, blank if OFF or Air.
> Nx icon (if Nitrox, numerical values), blank if OFF or Air.
• A (press/hold), while the FO2 digits are flashing - to scroll upward through the Set Points from Air to 21 through 100 in 1%
increments, at a rate of 8 per sec.
>> The scroll will stop when the button is released, or momentarily at 32, then 50, then 80 (%).
• A (< 2 sec) - to step upward through FO2 Set Points.
• M (< 2 sec) - to step back through FO2 Set Points.
• S (< 2 sec) - to save the FO2 setting and flash the PO2 digits (Fig. 38, page 20), or revert to SURF MAIN if Air.
• A (< 2 sec) - to step upward through PO2 Alarm Set Points from 1.20 to 1.60 (ATA) in 0.05 increments.
• M (< 2 sec) - to step back through PO2 Set Points.
• S (< 2 sec) - to save the FO2 setting and access Set Gas 3.
• S (2 sec) - to revert to Set F displaying the settings.
• M (2 sec) - to revert to SURF MAIN, or if no button is pressed during a 2 minute period.
SET GAS 3 FO2/PO2 is similar to SET GAS 2.
Once any Gas is set for Nitrox, any other Gas set for Air will automatically be set to 21%.
SET FO2 50% DEFAULT, information includes (Fig. 39):
> Graphics DEFAULT and 50.
> Set Point graphic OFF (or ON), flashing.
> Nx icon.
• S (< 2 sec) - to toggle between OFF and ON.
• A (< 2 sec) - to save the setting and revert to Set F.
SET A (ALARMS) MENU
S (< 2 sec) - to access Set A Menu while the selection Arrow icon ( > ) is next to Set A on the NORM (or GAUG) Menu.
A (< 2 sec) - to step down (forward) through selections.
M (< 2 sec) - to step up (back) through selections.
S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
Set Audible Alarm, information includes (Fig. 40):
> Graphic AUDIBLE.
> Set Point graphics ON and OFF; Arrow ( > ) icon next to the one previously saved flashing.
• A (< 2 sec) - to toggle Set Points.
• S (< 2 sec) - to save the setting and revert to the Set A Menu.
Set Depth Alarm, information includes (Fig. 41):
> Graphic DEPTH AL.
> Graphic OFF flashing, or Depth value flashing with FT (or M) and MAX icons.
• A (hold) - to scroll upward through Set Points at a rate of 8 per sec from 30 to 330 FT (10 to 100 M) in increments of 10 FT
(1 M).
• A (< 2 sec) - to step upward through Set Points one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to the Set A Menu.
There is a separate alarm associated with exceeding the MOD (max operating depth) which is a violation described later.
FREE mode has separate Depth Alarms that are not affected by this setting.
Set EDT Alarm, information includes (Fig. 42):
> Graphic EDT AL
> Elapsed Dive Time value (hr:min) flashing with MAX and Time (clock) icons
Fig. 39 - SET FO2 DEFAULT







** NORM only
Fig. 40 - SET AUDIBLE AL
Fig. 41 - SET DEPTH AL
Fig. 42 - SET EDT AL
Fig. 43 - SET TLBG AL
Fig. 44 - SET DTR AL
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OCS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OCS in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OCS

Oceanic OCS Quick start guide - English - 2 pages

Oceanic OCS Quick start guide - German - 2 pages

Oceanic OCS User Manual - German - 62 pages

Oceanic OCS Quick start guide - French - 2 pages

Oceanic OCS User Manual - French - 62 pages

Oceanic OCS Quick start guide - Italian - 2 pages

Oceanic OCS User Manual - Italian - 62 pages

Oceanic OCS Quick start guide - Spanish - 2 pages

Oceanic OCS User Manual - Spanish - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info