551838
56
Zoom out
Zoom in
Previous page
1/68
Next page
56
OC1 OPERATING MANUAL
© 2002 Design, 2009 Doc. No. 12-2761-r04 (9/6/11)
COMPASS OPERATION
Once it is Calibrated, Declination is set, the OP Mode is selected, and the course Heading is set (if Reference), the OC1 is ready
for operation on the surface or underwater.
• S (2 sec) - to access Compass OP Main while viewing a Surface or Dive Main screen (NORM, GAUG, or FREE) or the
Watch Default Time screen
North OP Main, information includes (Fig. 154) -
> Depth with FT (or M) icon, blank on surface
> North Mode icon
> Static Arrow icon, diver direction of travel
> Dynamic Arrow icon, relative direction of magnetic north
> Tilt icon (Fig. 154a), while Compass is tipped to either side (left or right) at an angle > 20°. Correct by moving Compass to
a level position.
> Diver's Heading as 001 to 360° with quadrant graphic.
Value removed when the Tilt icon is on.
• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from)
Reference OP Main, information includes (Fig. 155) -
> Depth with FT (or M) icon, blank on surface
> Reference Mode icon
> Static Arrow icon, diver direction of travel
> Turn Arrow icon (left or right) flashing, while > 10° deviation from Heading set
> Dynamic Arrow icon, tracking set Reference direction
> Tilt icon, while Compass is tipped to either side (left or right) at an angle > 20°
> Diver's Heading as 001 to 360° with quadrant graphic.
Value removed when the Tilt icon is on.
• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from)
• A (2 sec) - accesses Auto Home Reference Mode which changes and flashes the Mode icon (Fig. 156), then -
• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or Watch Time (whichever one access was from), with Compass
operation remaining in Reference Mode
• S (< 2 sec) - inverts the Heading, and during dives changes Compass operation to Auto Home.
> On surface operation remains in Reference Mode after return to the Surface or Dive Main, or Watch Time (whichever one
access was from).
Auto Home Main, information includes (Fig. 157) -
> Depth with FT (or M) icon
> Auto Home Mode icon
> Static Arrow icon, diver direction of travel
> Turn Arrow icon (left or right) flashing, while > 10° deviation from Heading
> Dynamic Arrow icon, tracking Home direction
> Tilt icon, while Compass is tipped to either side (left or right) at an angle > 20°
> Diver's Heading as 001 to 360° with quadrant graphic.
Value removed when the Tilt icon is on.
• S (2 sec) or 60 sec - reverts to Dive Main
Fig. 154 - NORTH OP MAIN
(during dive, Tilt)
a
Fig. 155 - REF OP MAIN
(during dive, Turn Left)
Fig. 156 - REF AUTO HOME
Fig. 157 - REF AUTO HOME
WARNING: You must become thoroughly familiar with setup and operation of the OC1 Digital
Compass before using it as your primary device for navigation. Failure to do so could result in
serious errors relating to activities involving navigation.
> Practice on land before use in water.
> Practice on the surface before use underwater.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OC1 in the language / languages: English as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OC1

Oceanic OC1 User Manual - English - 180 pages

Oceanic OC1 Additional guide - German - 2 pages

Oceanic OC1 Quick start guide - German - 2 pages

Oceanic OC1 User Manual - German - 68 pages

Oceanic OC1 Additional guide - French - 2 pages

Oceanic OC1 Quick start guide - French - 2 pages

Oceanic OC1 User Manual - French - 68 pages

Oceanic OC1 Additional guide - Italian - 2 pages

Oceanic OC1 User Manual - Italian - 68 pages

Oceanic OC1 User Manual - Turkish - 180 pages

Oceanic OC1 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info