551838
20
Zoom out
Zoom in
Previous page
1/68
Next page
20
OC1 OPERATING MANUAL
© 2002 Design, 2009 Doc. No. 12-2761-r04 (9/6/11)
Log Data 1, information includes (Fig. 34):
> Log Mode (book) icon
> Max Depth** with MAX and FT (or M) icons
> Graphic DSAT (or PZ+), the NDL Basis (algorithm selected)
> Graphic EDT with Dive Time (hr:min)
> Graphic SURF and pre dive SI (hr:min), 0:00 if Dive # 1, 9: - - if > 9:59, with Time (clock) icon
> Temperature (minimum that dive) with ° icon and graphic F (or C)
> TLBG with the max segment flashing, others fixed up to end of dive accumulation. All segments flashing if a Violation.
Blank if GAUG.
> VARI, max Ascent Rate sustained for 4 sec
> Nx icon, if Nitrox
** Max Depth for NORM dives is 330 FT (100 M), and for GAUG dives it is 660 FT (200 M).
• S (< 2 sec) to access the dive's Log Data 2 screen if Nitrox, or revert to the Preview screen if not
• L (on closure) to activate Backlight
Log Data 2 (Nitrox only), information includes (Fig. 35):
> Log Mode (book) icon
> Graphic GAS 1 (or 2 or 3), in use when dive ended
> Graphic FO2 with FO2 Set Point (or graphic Air) for Gas in used when dive ended
> Graphic PO2 with value of Max PO2 achieved
> Nx icon
> O2BG with O2 icon, accumulated when dive ended
• S (< 2 sec) to revert to the Preview screen
• L (on closure) to activate Backlight
SET F (FO2) MENU
S (< 2 sec) - to access Set F Menu while the selection Arrow icon ( > ) is next to Set F on the NORM Menu
A (< 2 sec) - to step down (forward) through selections
M (< 2 sec) - to step up (back) through selections
S (< 2 sec) - to access selection indicated by Arrow icon ( > )
The last setting saved is displayed next to each Menu item.
Refer to page 29 for an overview of FO2 settings and the 50% Default feature.
Set FO2 Gas 1, information includes (Fig. 36A/B):
> Max Depth with MAX and FT (or M) icons, allowed for PO2 Alarm Set, blank if Air
> Graphic GAS1
> Graphic FO2 with FO2 Set Point value, flashing
> Graphic PO2 with alarm value set
> Nx icon, blank if Air
• A (hold) to scroll upward through Set Points at a rate of 8 per second from Air (default) to 21 through 50 (%) in increments
of 1%.
> The scroll will stop when A is released, or pause at 32% if A is held depressed.
> Depress A, or keep it depressed, to resume the scroll from 32 through 50, then stop at Air (or 21%).
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the setting and revert to the Set F Menu
Gas 1 is the default gas on the surface prior to a new dive and 10 minutes after surfacing from dives.
Set FO2 Gas 2, information includes (Fig. 37):
> Max Depth with MAX and FT (or M) icons, allowed for PO2 Alarm Set, blank if Air
> Graphic GAS2
> Graphic FO2 with FO2 Set Point value, flashing
> Graphic PO2 with alarm value set
> Nx icon, blank if Air
• A (hold) to scroll upward through Set Points at a rate of 8 per second from Air** to 21 through 100 (%) in increments of
1%.
> The scroll will start at the FO2 Gas 1 Set Point** and stop when A is released, or pause at 50 then again at 80% if A is
held depressed.
> Depress A, or keep it depressed, to resume the scroll up through 100, then stop at the Gas 1 Set Point.
• A (< 2 sec) to step upward through Set Points one at a time
• M (< 2 sec) to step back through Set Points one at a time
• S (< 2 sec) to save the setting and revert to the Set F Menu
**Gas 2 cannot be set at a value less that set for Gas 1.
Fig. 34 - LOG DATA 1
Fig. 35 - LOG DATA 2










Fig. 36A - SET FO2 GAS 1
Fig. 36B - SET FO2 GAS 1
Fig. 37 - SET FO2 GAS 2
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OC1 in the language / languages: English as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OC1

Oceanic OC1 User Manual - English - 180 pages

Oceanic OC1 Additional guide - German - 2 pages

Oceanic OC1 Quick start guide - German - 2 pages

Oceanic OC1 User Manual - German - 68 pages

Oceanic OC1 Additional guide - French - 2 pages

Oceanic OC1 Quick start guide - French - 2 pages

Oceanic OC1 User Manual - French - 68 pages

Oceanic OC1 Additional guide - Italian - 2 pages

Oceanic OC1 User Manual - Italian - 68 pages

Oceanic OC1 User Manual - Turkish - 180 pages

Oceanic OC1 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info