551838
19
Zoom out
Zoom in
Previous page
1/68
Next page
19
OC1 OPERATING MANUAL
© 2002 Design, 2009 Doc. No. 12-2761-r04 (9/6/11)
Fly/Dsat, information includes (Fig. 30A/B):
> Time to Fly (hr:min), 0:00 if no dive yet, with graphic FLY
> Time to Desat (hr:min), 0:00 if no dive yet, with graphic DSAT
> Time (clock) icon
• S < 2 sec, revert to Menu
• L (on closure) to activate Backlight
NORM PLAN MODE
No Deco Dive Times (NDLs) in NORM Plan Mode are based on the Algorithm selected (DSAT or PZ+) and only on the FO2 set
for Gas 1. FO2 set for Gas 2 and 3 are not used.
NORM Menu >> Plan Lead-in >> PDPS
Plan Lead-in, information includes (Fig. 31A/B):
> Graphic PLAN
> Graphic FO2_1 (Gas 1)
> Graphic Air or numeric % value (21 to 50), indicating the FO2 set for Gas 1
> Graphic PO2 with PO2 Alarm value set (1.20 to 1.60), if Nitrox, blank if Air
> Nx icon, if Nitrox
• S < 2 sec to access PDPS
• L (on closure) to activate Backlight
PDPS (Pre Dive Planning Sequence)
The PDPS displays Depths and allowable No Deco Dive Times. It will sequence through Depths from 30 to 190 FT (9 to 57 M),
or the Max Depth that will allow theoretical No Deco Dive Time of at least 1 minute based upon the previous dive profiles in a
series of repetitive dives and taking into account descent and ascent rates of 60 FPM (18 MPM).
When the Conservative Factor is set On, No Deco Dive times are reduced to the values of the next 3000 foot (915 meter) higher
Altitude. Refer to tables in back.
PDPS, information includes (Fig. 32A/B):
> Max Depth with MAX and FT (or M) icons, if Nitrox, blank if set for Air
> Plan Depth value with graphic FT (or M)
> Graphic NDC (or OTR) with Dive Time allowed (hr:min) with Time (clock) icon, no OTR if Air
> Graphic PO2 with PO2 Alarm value set (1.20 to 1.60), if Nitrox, blank if set for Air
> Nx icon, if Nitrox
• A (hold) to scroll upward through screens at a rate of 8 per second increasing planned Depth from 30 to 190 FT (9 to 57 M)
in increments of 10 FT (3 M)
• A (< 2 sec) to step upward through screens one at a time
• M (< 2 sec) to step back through screens one at a time
• S (< 2 sec) to revert to the Plan Lead-in screen
• L (on closure) to activate Backlight
NORM/GAUG LOG MODE
Information from the latest 24 NORM and/or GAUG dives is stored for viewing. After exceeding 24 dives, the most recent dive
is stored while the oldest is deleted.
> Dives are numbered from 1 to 24 starting each time NORM (or GAUG) Dive Mode is activated. After the post dive 24 hour
period has elapsed, the first dive of the next operation period is #1.
> During the first 10 minutes after a dive (Transition Period), that dive’s Log screens can be viewed. After 10 minutes, the Log
screens for all dives stored can be viewed.
> In the event that a dive’s elapsed time (EDT) exceeds 9:59 (hr:min), the data at the 9:59 interval is recorded in the Log upon
surfacing of the unit.
NORM Menu >> Log Preview >> Log Data 1 >> Log Data 2
Log Preview, information includes (Fig. 33):
> Log Mode (book) icon
> Graphic NO-D (or DECO or GAUG or VIOL)
> Graphic DIVE and dive number (1 to 24, 0 if no dive yet).
> Time dive began (hr:min) with Time (clock) icon and A (or P), and the graphic ALT if Alternate Time
> Date, the dive was conducted
> Nx icon, if Nitrox
• A (hold) to scroll upward through Preview screens at a rate of 8 per second
• A (< 2 sec) to step upward through screens one at a time
• M (< 2 sec) to step back through screens one at a time
• S (< 2 sec) to access the dive's Log Data 1 screen
• L (on closure) to activate Backlight
Fig. 30A - FLY/SAT
(10 min after dive)
Fig. 30B - FLY/SAT
(< 10 min after dive)
Fig. 31A - PLAN LEAD-IN
(Gas 1 set for Air)
Fig. 31B - PLAN LEAD-IN
(Gas 1 set for Nitrox)
Fig. 32A - PDPS
(nitrogen control)
Fig. 32B - PDPS
(oxygen control)
Fig. 33 - LOG PREVIEW
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OC1 in the language / languages: English as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OC1

Oceanic OC1 User Manual - English - 180 pages

Oceanic OC1 Additional guide - German - 2 pages

Oceanic OC1 Quick start guide - German - 2 pages

Oceanic OC1 User Manual - German - 68 pages

Oceanic OC1 Additional guide - French - 2 pages

Oceanic OC1 Quick start guide - French - 2 pages

Oceanic OC1 User Manual - French - 68 pages

Oceanic OC1 Additional guide - Italian - 2 pages

Oceanic OC1 User Manual - Italian - 68 pages

Oceanic OC1 User Manual - Turkish - 180 pages

Oceanic OC1 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info