Manual Oceanic Atom 3.0 (page 21 of 56) (English)

550349

Zoom out

Zoom in

1/56

ATOM 3.0 OPERATING MANUAL

Set End Alarm (TMT 1, 2, 3) information includes (Fig. 56):

> Graphics SEt and END AL with all Tank icons (1, 2, 3).

> Set Point graphic OFF (or Pressure value) ﬂashing, with PSI (or BAR) icon.

• A (hold) - to scroll upward through Set Points (8/sec) from 300 to 1500 PSI (20 to 105 BAR) in 100 PSI (5 BAR) increments.

• A (< 2 sec) - to step upward through Set Points.

• M (< 2 sec) - to step back through Set Points.

• S (< 2 sec) - to save the setting and access Set PO2 Alarm.

• S (2 sec), if no change - to revert to Set Turn Alarm.

Set PO2 Alarm (NORM), information includes (Fig. 57):

> Graphic SEt and AL.

> PO2 value (ATA) ﬂashing with icon.

• A (< 2 sec) - to step upward through Set Points from 1.20 to 1.60.

• M (< 2 sec) - to step back through Set Points.

• S (< 2 sec) - to save the setting and revert to Set A Lead-in.

• S (2 sec), if no change - to revert to Set End Alarm.

SET U GROUP (UTILITIES)

Selections >> Wet > Units > DS* > SS* > Algo* > CF* > Glo > SR > TMT 1 > TMT 2 > TMT 3.

*Items apply to NORM only.

> Set Points remain as set until changed.

Set U Lead-in, information includes (Fig. 58):

> Graphics Goto and SET U.

• A (< 2 sec) - to step forward to Select DIVE OP mode.

• M (< 2 sec) - to step back to SET A.

• S (< 2 sec) - to access Set Wet.

Set Wet Activation, information includes (Fig. 59):

> Graphics SEt and WET.

> Set Point graphic ON (or OFF) ﬂashing.

• A or M (< 2 sec) - to toggle between ON and OFF.

• S (< 2 sec) - to save the setting and access Set Units.

• S (2 sec), if no change - to revert to SET U.

Set Units, information includes (Fig. 60):

> Graphic SEt and UNIT.

> Set Point icons FT and PSI (or M and BAR) ﬂashing.

• A or M (< 2 sec) - to toggle between FT/PSI and M/BAR.

• S (< 2 sec) - to save the setting and access Set DS if NORM, or Set Glo if GAUG.

• S (2 sec), if no change - to revert to Set Wet.

Set DS (NORM Deep Stop), information includes (Fig. 61):

> Graphic SEt and DEEP St with Stop arrow/bar icons.

> Set Point graphic ON (or OFF) ﬂashing.

• A or M (< 2 sec) - to toggle between ON and OFF.

• S (< 2 sec) - to save the setting and access Set SS.

• S (2 sec), if no change - to revert to Set Units.

When set On, the Deep Stop feature activates when descent is made to a depth deeper than 80 FT (24 M) during No Deco.

A Stop Depth is calculated to be 1/2 the Max Depth achieved, then upon ascent to within 10 FT (3 M) below that depth, the Deep Stop screen is

displayed in place of the No Deco Main.

Fig. 56 - SET END AL

(applies to TMT in use)

Fig. 57 - SET PO2 AL

Fig. 58 - SET U LEAD-IN

Fig. 59 - SET WET

ACTIVATION

Fig. 60 - SET UNITS

Fig. 61 - SET DS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Atom 3.0 in the language / languages: English as an attachment in your email.

The manual is 12,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic Atom 3.0

Oceanic Atom 3.0 Quick start guide - English - 2 pages

Oceanic Atom 3.0 User Manual - German - 56 pages

Oceanic Atom 3.0 Quick start guide - French - 2 pages

Oceanic Atom 3.0 User Manual - French - 56 pages

Oceanic Atom 3.0 Quick start guide - Italian - 2 pages

Oceanic Atom 3.0 User Manual - Italian - 56 pages

Oceanic Atom 3.0 User Manual - Spanish - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Atom 3.0 Manual

Product: