Manual Oce OP31C 3000 sheet finisher (page 15 of 27) (English)

46801

Zoom out

Zoom in

1/27

Copying in the Hole Punch Mode

1. Select the Hole Punch mode on the

operation panel of your copier.

* Refer to the Instruction Handbook of your

copier for more detailed information on

selecting the desired copy mode.

* The Hole Punch mode can be used in

combination with each of the Sort, Sort-

Staple and Group modes.

* Acceptable copy paper weight:

45 g/m

- 160 g/m

* Hole punching will be accomplished as

shown in the illustration above (as viewed

from the front of the copies).

• Units based on metric specifications:

2 or 4 hole punch

• Units based on inch specifications:

2 or 3 hole punch

* The position of the holes on each page may

differ very slightly due to the fact that holes

are punched in one sheet at a time.

2. Set the originals to be copied. The finished

copies will be ejected face up onto the Non-

sort tray.

* When setting the originals on the platen,

copy the originals in reverse order – from the

last page to the first – in order to have the

finished copies ejected in their proper order.

If the number of A3 (11" x 17") or B4 (81/2" x 14")

size copies to be made is set to 151 or more – or

to 251 or more for A4 (11" x 81/2") or A4R (81/2" x

11") size copies –, the Stacking mode will

engage and the finished copies will be ejected

onto the Sort tray.

* If you are using a 62 ppm copier, the first 99

copies will be ejected onto the Non-sort tray

and any copies from 100 onward will all

ejected onto the Sort tray.

* If the Stacking mode does not engage and

the number of finished copies in the Non-sort

tray reaches the acceptable limit, an error

message will be displayed on the copier and

copying will stop. Remove all of the finished

copies from the Non-sort tray and then

resume copying.

* When the Hole Punch mode is used in

combination with either the Sort, Sort-Staple

or Group mode, the finished copies will be

ejected face down onto the Sort tray

regardless of where the originals are set.

3. Select the desired paper size and copy

exposure, etc.

* The copy paper sizes that are acceptable

for hole-punching and the available

positioning and number of holes may

differ depending on the specifications for

your unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP31C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP31C 3000 sheet finisher Manual

Product: