46801

Oce OP31C 3000 sheet finisher Manual

14
Zoom out
Zoom in
Previous page
1/27
Next page
Copying in the Sort-Staple Mode
1. Select the Sort-Staple mode on the
operation panel of your copier.
* Refer to the Instruction Handbook of your
copier for more detailed information on
selecting the desired copy mode.
* Acceptable copy paper sizes:
A3, B4, A4, A4R (11" x 17", 81/2" x 14",
11" x 81/2", 81/2" x 11")
* 2-position stapling is not available with A4R
size paper.
* Stapling will be accomplished as shown in
the illustration above (as viewed from the
front of the copies).
2. Set the originals to be copied in the
Document Feeder.
* A maximum of 50 (75-80g/m
2
) A4 or A4R
(11" x 81/2" or 81/2" x 11") size copies can be
stapled at one time. Up to 30 (75-80g/m
2
)A3
or B4 (11" x 17" or 81/2" x 14") size copies
can be stapled at one time.
Note: Depending upon the paper weight of the
paper stock being used, it is possible that
the number of copies that can be stapled will
differ from that indicated above.
* When setting an original on the platen, a
message will appear after each original is
scanned to confirm whether you want to
scan another original or not. Refer to the
Instruction Handbook of your copier for
further details.
3. Select the desired paper size and copy
exposure, etc.
* Acceptable copy paper sizes
(1-position stapling):
A3, B4, A4, A4R (11" x 17", 81/2" x 14",
11" x 81/2", 81/2" x 11")
* Acceptable copy paper sizes
(2-position stapling):
A3, B4, A4 (11" x 17", 81/2" x 14",
11" x 81/2", 81/2" x 11")
4. Press the Print key. The copies will be
automatically stapled and ejected onto the
Sort tray.
* In this case, finished copies will be
ejected face down.
* If the Sort tray reaches its maximum
acceptable capacity, a message will be
displayed on the copier. In this case, remove
all copies from the Sort tray.
* The maximum number of copies that can be
stored on the Sort tray will differ depending
on the size of copy paper that is being used.
Refer to page 71.
5. Remove all of the finished copies from the
Sort tray.
14
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP31C 3000 sheet finisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP31C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info