46801

Oce OP31C 3000 sheet finisher Manual

12
Zoom out
Zoom in
Previous page
1/27
Next page
Making a Large Number of Copies in the
Sort Mode
If the number of originals to be copied
exceeds the acceptable limit for the Document
Feeder, use the Job Build function of your
copier to sort your copies.
1. Select the Sort mode on the operation
panel of your copier.
* Refer to the Instruction Handbook of your
copier for more detailed information on
2. Select an applicable mode from the Job
Build function of your copier.
* Refer to the Instruction Handbook of your
copier for more detailed information on
selecting an applicable mode.
3. Select the desired paper size and
magnification ratio, etc.
* Acceptable copy paper sizes:
A3, B4, A4, A4R (11" x 17", 8 1/2" x 14",
11" x 8 1/2", 8 1/2" x 11")
4. Confirm the acceptable number of originals
that can be set in the Document Feeder,
and set only that number of originals in the
Document Feeder.
* Refer to the Instruction Handbook for your
copier for more detailed information on
the acceptable sizes and number of
originals that can be set in the Document
Feeder.
* When copying from a large number of
originals, split the originals into smaller sets
and set each group in the Document Feeder
separately but in order from the first to the
last page. The information for all of the
originals will be scanned and stored in the
copier’s memory.
5. Continue placing all sets of originals to be
copied in the Document Feeder until all of
the sets have been scanned and stored in
the copier’s memory.
* Refer to the Instruction Handbook for your
copier for more detailed information on
setting originals.
6. Press the Print key. Finished copies will be
ejected in multiple groups, face down onto
the Sort tray with each full set shifted
slightly from the previous one.
* If the Sort tray reaches its maximum
acceptable capacity, a message will be
displayed on the copier. In this case, remove
all copies from the Sort tray.
* The maximum number of copies that can be
stored on the Sort tray will differ depending
on the size of copy paper that is being used.
Refer to page 71.
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP31C 3000 sheet finisher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP31C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info