Manual Oce OP31C 3000 sheet finisher (page 17 of 27) (English)

46801

Zoom out

Zoom in

1/27

Copying in the Non-Sort Mode

1. Set the originals to be copied in the

Document Feeder and perform the

appropriate procedure to start copying. The

finished copies will be ejected face down

onto the Non-sort tray.

* If the originals to be copied are set on the

platen, the finished copies will be ejected

face up onto the Sort tray.

If the number of A3 (11" x 17") or B4 (81/2" x 14") size copies to be made is set to 151 or more – or to

251 or more for A4 (11" x 81/2") or A4R (81/2" x 11") size copies –, the Stacking mode will engage and

the finished copies will be ejected onto the Sort tray.

* If you are using a 62 ppm copier, the first 99 copies will be ejected onto the Non-sort tray and any

copies from 100 onward will all ejected onto the Sort tray.

* If the Stacking mode does not engage and the number of finished copies in the Non-sort tray

reaches the acceptable limit, an error message will be displayed on the copier and copying will

stop. Remove all of the finished copies from the Non-sort tray and then resume copying.

2. Remove all of the finished copies from the

Non-sort or the Sort tray, as appropriate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP31C 3000 sheet finisher in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP31C 3000 sheet finisher Manual

Product: