47327
18
Zoom out
Zoom in
Previous page
1/25
Next page
COMMAND CENTER
17
6-4 Advanced > Protocols: Netware: General
This machine supports both NDS and bindery printing in either printer server mode or
remote printer mode.
Netware setup requires installation of the following client software and logon with
Administrator Privileges. If you are unsure, please contact your network administrator.
Novell Client: Creation of the NetWare print objects with the AdminManager NetWare
Setup Wizard requires the NetWare Client from Novell. For NetWare printing, clients
may use the NetWare Client from either Novell or Microsoft.
Admin Privileges: Network operations concerning creating queues etc. require 'admin'
or 'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
inoperable if you attempt those operations without sufficient privileges.
6-5 Advanced > Protocols: Netware: Bindary Services
This allows registration of the file server for Print Server mode for making the
connection and the print server for Remote Printer mode. If no registration is made, a
network search is made at startup, and connection is automatically made to the first
eight servers that are found.
Item Description
NetWare Protocol Select whether to enable (On) or disable (Off) the NetWare protocol.
Bindery Mode Select whether to enable (On) or disable (Off) bindery mode.
Frame Type The available settings are the 802.2, SNAP, ETHERNET-II, and 802.3
frame types, and Auto for automatic identification.
NDS Tree Specify the name of the NDS tree to connect to.
NDS Context Specify the NDS context to connect to in Print Server mode.
Print Server Mode Enables (On) or disables (Off) the Print Server mode.
Print Server Name This displays the Print Server name.
Queue Polling Interval This sets the polling interval.
Banner Page Requests Specifies if print banner page when printing by LPR, FTP, TCP/IP
RawPort.
Password (Optional) This sets the password. Login to NetWare will be successful only if the
password set here matches the Print Server password set in the NetWare
utilities.
Remote Printer Mode Enables (On) or disables (Off) the Print Server mode.
Remote Printer Name This displays the Print Server name.
Job Timeout Sets the timeout value for the end of the job when operating in Remote
Printer mode in the range from 4 seconds to 255 seconds.
Item Description
Print Server Mode This enables registration for up to eight file servers. If there are nine or
more file servers, register the file server names that have priority in
connection.
If no registration is made, a connection is automatically made to up to
eight servers at startup. The print server names in the file servers must
match the print servers names in this system.
Remote Printer Mode This enables registration for up to eight print servers. If there are nine or
more print servers, register the print server names that have priority in
connection.
If no registration is made, a connection is automatically made to up to
eight servers at startup. The printer names (printer port names) in the print
servers must match with the remote printer names (printer port names) in
this system.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Operation Guide Command Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Operation Guide Command Center in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info