663191
9
Zoom out
Zoom in
Previous page
1/15
Next page
EN
EN
H
2
3
If the keyed nut (3) and
shift driver (4) markings are not
aligned, full overdrive will need to
be reset.
If the markings are not obvious,
full overdrive should result in
the hub/wheel rotating 1.8-2
times for every 1 rotation of the
CVP sprocket.
Reinstall the hub interface
(angular position is unimportant),
leaving the shift adapter
uninstalled.
The hub interface will be
used to shift the CVP into full
overdrive by hand in the
following steps.
Adjusting Shifter Resistance
If additional resistance is
desired at the shifter, the Allen
screw (1) at the bottom of the
shifter can be adjusted with a
2mm hex.
Clockwise (in) provides more
resistance.
Additional resistance can
reduce unwanted feedback at
the shifter.
5. SERVICE INSTRUCTIONS
1
5. SERVICE INSTRUCTIONS
4
3
15
16
Resetting CVP to Full Overdrive
The NuVinci N360 CVP is shipped
in full overdrive with an anti-shift
retainer installed (reference Step
2.2).
If the hub interface is incorrectly
installed, full ratio range of the
CVP may be unavailable, and
full overdrive will need to be
reset.
If installed on the bicycle, shift
the CVP into overdrive (H) as far
as possible, and remove the rear
wheel per Section 3.
If installed, remove the shift
adapter (2) from the hub interface
(3) with a small screwdriver, then
remove the hub interface by lifting
carefully from underneath.
5.5
5.5
5.6
5.6
5.7
5.8
5.7
5.8
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NuVinci N360 -2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NuVinci N360 -2010 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NuVinci N360 -2010

NuVinci N360 -2010 User Manual - German - 15 pages

NuVinci N360 -2010 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info