663190
9
Zoom out
Zoom in
Previous page
1/15
Next page
EN
EN
If the spline nut (3) and
shift driver (4) markings are not
aligned, full overdrive will need to
be reset.
fIf the markings are not obvious,
full overdrive should result in
the hub/wheel rotating 1.8-2
times for every 1 rotation of the
CVP sprocket.
Set the hub interface to the full
underdrive (L) position (note this
is opposite of normal installation).
Reinstall the hub interface (angular
position is unimportant), leaving
the RH Nut uninstalled.
fThe hub interface will be
used to shift the CVP into full
overdrive by hand in the
following steps.
5. SERVICE INSTRUCTIONS 5. SERVICE INSTRUCTIONS
15
16
Resetting CVP to Full Overdrive
The NuVinci N360 CVP is shipped
in full overdrive with an anti-shift
retainer installed (reference Step
2.2).
fIf the hub interface is incorrectly
installed, full ratio range of the
CVP may be unavailable, and
full overdrive will need to be
reset.
If installed on the bicycle, shift
the CVP into overdrive (H) as far
as possible, and remove the rear
wheel per Section 3.
Remove the RH Nut (2) that
secures the hub interface (3), then
remove the hub interface by lifting
carefully from underneath.
H
2
3
5.5
5.5
5.6
5.7
4
3
5.6
5.7
L
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NuVinci N 360 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NuVinci N 360 - 2012 in the language / languages: English as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NuVinci N 360 - 2012

NuVinci N 360 - 2012 User Manual - German - 15 pages

NuVinci N 360 - 2012 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info