663190
11
Zoom out
Zoom in
Previous page
1/15
Next page
EN
EN
Removing the Brake
Conguration
Remove the rear wheel per Section 3.
Removing Roller Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), and left
hand nut (3).
fSecure the wheel and use Nu-
Vinci service tool N360-BKAD-01
to remove the brake lock ring
(6), and remove the roller brake
adapter (7) from the hub.
Removing Rim Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), left hand
nut (3), and cupped washer (4).
fUsing a thin at device, pry and
remove the rim brake cover (5).
Removing Disc Brake Hardware
fRemove left hand axle nut (1), left
hand no-turn washer (2), left hand
nut (3), and cupped washer (4).
fSecure the wheel and use
NuVinci tool N360-BKAD-01 to
remove the brake lock ring (6),
and remove both the brake shield
(8) and disc brake adapter (9)
from the hub.
Installing the Brake
Conguration
Installing Roller Brake Hardware
fInstall the roller brake adapter (7)
and apply a high strength thread
locking compound (equivalent
to Loctite® 277™) around one
complete thread of the brake lock
ring (6).
fUsing NuVinci service tool N360-
BKAD-01, install and torque the
brake lock ring (6) to 55-65 Nm
(41-48 ft-lbs).
fAfter installing roller brake, install
and torque left hand nut (3) to
30-35 Nm (22-26 ft-lbs).
Installing
Rim Brake Hardware
fPress rim brake cover (5) into po-
sition until it seats fully, followed
by the cupped washer (4).
fInstall and torque left hand nut (3)
to 30-35 Nm (22-26 ft-lbs).
Installing
Disc Brake Hardware
fInstall the disc brake adapter (9)
and brake shield (8) and applya
high strength thread locking
compound (equivalent to Loctite®
277™) around one complete
thread of the brake lock ring (6).
fUsing NuVinci tool N360-
BKAD-01, install and torque the
brake lock ring (6) to 55-65 Nm
(41-48 ft-lbs).
fInstall and torque left hand nut (3)
to 30-35 Nm (22-26 ft-lbs).
5. SERVICE INSTRUCTIONS
19
20
N360 Specications
Hub Colors Silver or Black
Spoke Configurations 32 or 36 Hole
Brake Configurations Disc, Rim or Roller
Speed Ratio Infinitely Variable
within Ratio Range
Ratio Range 360% Nominal
(0.5 Underdrive to
1.8 Overdrive)
Shifting Variable Twist Grip,
3/4 Turn
Drop-Out Width 135 mm, Horizontal
or Vertical
Axle Length 183 mm
Axle Threads M10x1
Chainline 49.0 ± 0.5 mm
Beltline 45.5 ± 0.5 mm
Sprockets
16-22 Tooth Supported
(
standard 9-spline, not included)
Sprocket Ratio 1.8:1 Minimum
(16/29, 17/31, 18/33, 19/35, 20/36,
21/38, 22/40,
larger front chainrings
can be used without exception)
Spoke Flange Diameter 125.0 mm
Center to Left Spoke Flange
26.0 mm
Center to Right Spoke Flange
26.0 mm
For the most up-to-date NuVinci
N360 CVP Owner and Technical
Manuals please visit us online at
www.nuvinci.com/support
6. TECHNICAL DATA
fReference Exploded Diagram P.21 fReference Exploded Diagram P.21
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NuVinci N 360 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NuVinci N 360 - 2012 in the language / languages: English as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NuVinci N 360 - 2012

NuVinci N 360 - 2012 User Manual - German - 15 pages

NuVinci N 360 - 2012 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info