663190
6
Zoom out
Zoom in
Previous page
1/15
Next page
EN
EN
2. ASSEMBLY OF COMPONENTS 2. ASSEMBLY OF COMPONENTS
Installing Shift Cables and
Hardware
Pass the shift cables through the
appropriate cable housing and
ensure the housing is seated
completely into the shifter.
fThread both barrel adjusters
completely clockwise (in) to
provide maximum installation
slack.
Pull the underdrive shift cable
(1) rmly at the rear axle location
until it stops, checking to make
sure that the NuVinci shift indica-
tor (2) goes completely at.
Pass the underdrive shift cable
(3) through the UD cable stop (4)
and secure the UD cable stop at
the distance shown while pulling
the cable rmly.
fEnsure that the cable housing
is seated fully at the shifter.
fUsing a 2mm allen, secure the
cable and torque to 1.5-2.0
Nm (13-18 in-lbs).
fCut the excess cable at a
maximum of 2.0mm from the
end of the UD cable stop (5).
Pull the overdrive shift
cable (6) rmly at the hub interface
until it stops, checking to make
sure that the NuVinci shift
indicator goes into a steep hill (7).
fMake sure the underdrive shift
cable and UD cable stop are
free and unobstructed.
Pass the overdrive shift
cable (8) through the OD latch (9)
and secure the OD latch at the
distance shown while pulling the
cable rmly.
fEnsure that the cable housing
is seated fully at the shifter.
fUsing a 2mm allen, secure the
cable and torque to 1.5-2.0
Nm (13-18 in-lbs).
fCut the excess cable at a the
OD latch marking (10), and
tuck the remaining cable length
into the OD latch as shown (11).
The cable hardware should
appear as shown. Assemble to
CVP per Step 3.2 and adjust cable
slack with barrel adjusters per
Step 4.2.
9
10
2.15
2.16
2.17
2.18
2.19
1
2
3
4
5
120mm
2.15
2.16
7
6
2.17
8
9
10
11
111mm
2.18
2.19
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NuVinci N 360 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NuVinci N 360 - 2012 in the language / languages: English as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NuVinci N 360 - 2012

NuVinci N 360 - 2012 User Manual - German - 15 pages

NuVinci N 360 - 2012 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info