Manual Nutool BT211N (page 27 of 92) (English, German, French, Italian, Polish, Portuguese, Spanish, Finnish)

549799

Zoom out

Zoom in

1/92

� Caution! Special care is required when making

double mitre cuts.

� Do not overload your tool!

� Wear safety goggles.

� Wear a breathing mask on dusty jobs.

� Examine the power cable / extension cable for

damage.

 Wear goggles

 Wear ear-muffs

 Wear a breathing mask

Noise emission values

� The saw’s noise is measured in accordance with

DIN EN ISO 3744; 11/95, E DIN EN 31201; 6/93,

ISO 7960 Annex A; 2/95. The machine may

exceed 85 dB(A) at the workplace. In this case,

noise protection measures need to be introduced

for the user (ear-muffs).

Cutting Idling

Sound pressure level LPA 92,4 dB(A) 93,3 dB(A)

Sound power level LWA 105,4 dB(A) 106,3 dB(A)

„The quoted values are emission values and not

necessarily reliable workplace values. Although there

is a correlation between emission and immission

levels it is impossible to draw any certain conclusions

as to the need for additional precautions. Factors

with a potential influence on the actual immission

level at the workplace include the duration of impact,

the type of room, and other sources of noise etc.,

e.g. the number of machines and other neighbouring

operations. Reliable workplace values may also vary

from country to country. With this information the

user should at least be able to make a better

assessment of the dangers and risks involved.“

5. Technical data

Asynchronous motor 230 V 50 Hz

Power rating 1200 W

Operating mode S1

Idle speed n0 4600 rpm

Carbide saw blade ø 210 x ø 30 x 2.5 mm

Number of teeth 24

Connector for dust extractor ø 35 mm

Standing area 400 x 285

As bench-type circular saw:

Saw table 360 x 250 mm

Cutting height 0 - 33 mm

Parallel stop swinging range -30° to +30°

As mitre box saw:

Tilting range -45° / 0° / +45°

Mitre cuts 0° to 45° to the left

Saw bed support 390 x 140 mm

Sawing width at 90° 120 x 55 mm

Sawing width at 45° 65 x 55 mm

Sawing width at 2 x 45°

(double mitre cuts) 40 x 23 mm

6. Before putting the machine into

operation (Abb. 1-3)

6.1 General information

� The machine has to be set up where it can stand

firmly, e.g. bolt it to a work bench, a universal

base or similar.

� All the covers and safety devices have to be

properly fitted before the machine is switched on.

� It must be possible for the saw blade to run

freely.

� When working with wood that has been

processed before, watch out for foreign bodies

such as nails or screws etc.

� Before you actuate the On/Off switch, make sure

that the saw blade is correctly fitted and that the

machine’s moving parts run smoothly.

� Before you connect the machine to the power

supply, make sure the data on the rating plate is

the same as that for your mains.

6.2 Converting the combination saw

The saw has two working positions:

A: Bench-type circular saw (Fig. 1)

B: Cross-cut and mitre box saw (Fig. 2)

Anleitung KGST 210/1 19.09.2002 18:49 Uhr Seite 18

Voltage 220-240V~50Hz

Power rating 1500 W

Operating mode S1.1200WS6.25%1500W

No load speed 5000 min

-1

As bench-type circular saw:

Saw table 384x270mm

Cutting height 0 ÷ 33 mm

Parallel stop swinging range -30ºa+30º

As mitre box saw:

Tilting range -45º/0º/+45º

Mitre cuts 0ºto45ºtotheleft

Saw bed support 390x140mm

Max.crosscutat90° 55x115mm

Max.mitrecutat45° 52x77mm

Max.bevelcutat45° 40x110mm

Max.compoundcut45°x45° 35x95mm

Weight 10 kg

Cutting Idling

SoundpressurelevelLPA 98,2dB(A) 93,3dB(A)

SoundpowerlevelLWA 111,2dB(A) 106,3dB(A)

Accelerationvalue=1,814m/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nutool BT211N in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 7,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nutool BT211N Manual

Product: