Manual Numatic TTV - 5565- 200T (page 18 of 28) (English)

564479

Zoom out

Zoom in

1/28

Next remove oor-tool vacuum hose and ush out with clean water.

Next empty clean-water tank, using emptying hoseand again ush out with clean

water.

ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF PRIOR TO ANY

MAINTENANCE USING THE MASTER CONTROL ON/OFF KEY.

REMOVE THE KEY PRIOR TO ANY MAINTENANCE OPERATION.

After use, empty waste-water tank using emptying

hose and ush-out with clean water.

Whilst pressing in the top tank hood toggles,

remove the hood (Fig.31)

The hood also has a sealing-rubber which

should be examined at

every clean-down.

Rinse using clean water, avoiding the vac lter

(Fig.31a).

IMPORTANT:

Remove white vac lter and clean if required (keep dry) (Fig.31a).

Never use the machine without the recommended lter as it may cause damage to

the machine (Fig.31a).

Remove debris basket lter and rinse using clean water, and ret.

IMPORTANT:

If the debris basket is allowed to become clogged, vacuum performance can deteriorate.

(Fig.31b)

The clean-water tank lter is located to the rear of the battery compartment,

and should be checked at regular intervals.

Unscrew the cap check the lter condition (Fig.31c), rinse and ret.

Ensure tank has been emptied and care is taken when working in the vicinity of

batteries.

Fig.31

Fig.31a

Fig.31b

NOTE:

ANY SPILLS SHOULD BE WIPED-UP BEFORE THE TOP TANK IS

LOWERED.

Located in your waste water (top) tank is a full tank switch, this stops your

machine from working once the waste water reaches its maximum limit.

Sometimes the switch gets clogged and blocked, clean to ensure correct

operation (see page 15).

Fig.31 c

Regular Maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV - 5565- 200T in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV - 5565- 200T Manual

Product: