Manual Numatic TTV - 5565- 200T (page 16 of 28) (English)

564479

Zoom out

Zoom in

1/28

Breakaway oor-tool

Fig.26

The oor-tool design incorporates a breakaway feature.

Allowing it to safely disengage from its mounting should it

become caught on an obstruction, during forward machine movement.

(See Fig.26)

Fig.27

To re-attach the blade to its holder.

First loosen the retaining knobs on the oor-tool body and slide onto the

holding bracket.

Tighten retaining knobs to nger tight.

(See Fig.27)

ALWAYS ENSURE THAT THE FLOOR IS PRE-SWEPT

AND RELEVANT SAFETY SIGNS ARE DISPLAYED.

NOTE: Care must be taken to reduce speed when

cornering or when manoeuvring around obstacles.

! !

To operate, turn the master control On / Off key to the ‘On’

position, select water ow rate, chemical mix (see page 14).

lower the oor-tool (see page 13) and select forward (see page 8,

Fig.4), press the start / stop trigger.

Vacuum pick-up, water-ow and chemical-dose will turn on

automatically and the machine will move forward.

Adjust the speed to suit the conditions using the variable speed

control (see page 8).

The clean water / chemical mix is dispersed evenly via

‘THRU- FEED’ scrubbing brushes.

The waste water is then retrieved by the suction oor-tool

(see page 9).

Overlap each scrubbing path by 10cm to ensure

an even clean.

Do not operate the machine on inclines that exceed (9%), when

full.

If streaking occurs wipe oor-tool blades clean (see Fig.29).

On heavily soiled oors use a ‘double scrub’ technique.

First pre-scrub the oor with the oor-tool in the raised position,

allow the chemical time to work then scrub the area a second

time with the oor-tool lowered.

Fig.28

Fig.29

Machine Operation

Machine in use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV - 5565- 200T in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV - 5565- 200T Manual

Product: