Manual Numatic TTV - 5565- 200T (page 19 of 28) (English)

564479

Zoom out

Zoom in

1/28

! !

ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED PRIOR TO ANY

MAINTENANCE

Note:

Floor Tool adjusters are factory set for optimal performance.

The blades are designed to be reversible, thus extending their useful working life.

Changing the Floor Tool Blades

Fig.39

Fig.40

Fig.38

To clean the oor-tool, remove securing-pin and disconnect the lifting strap and remove the oor-tool securing

pin pull-free the oor-tool from the rear of the machine.

Rinse the oor-tool assembly with clean water and ret.

Periodically the oor-tool blades should be examined and checked for wear and damage.

The blade removal is easy. Simply start by removing the four retaining pins (see Fig.38), turn the oor-tool over and

separate the blade carrier from the body (see Fig.39).Peel away the blades from their locating lugs (see Fig.40) and

examine or renew as required.

Replacement is a reversal of the removal process.

Floor-tool overview

1. Floor-tool main body

2. Rear blade

3. Blade carrier

4. Front blade (slotted)

5. Retaining pins x 4

The TTV range is provided with the aluminium oor-tool shown.

The Floor Tool

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic TTV - 5565- 200T in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic TTV - 5565- 200T Manual

Product: