Manual Numark Orbit (page 6 of 24) (English, German, French, Italian, Spanish)

618136

Zoom out

Zoom in

1/24

Wireless Usage

You can use Orbit as a "wired" controller by connecting it to your computer's USB port with the

mini-USB cable. To take advantage of its wireless possibilities, though, please read this

section.

Pairing Orbit to the Wireless USB Receiver

If the wireless USB receiver's light is off even when it is connected to your computer, follow

these steps:

1. Make sure Orbit is off and the wireless USB receiver is not connected to a computer.

2. Press and hold down Pad Bank Selectors 1 and 4, and then power Orbit on.

3. Press the lower-right-most pad (the pad labeled "b" in the diagram on the previous page).

Virtual Knob Selector K1 will flash.

4. Connect the wireless USB receiver to your computer within 10 seconds. Virtual Knob

Selector K2 will flash.

5. Press the pad above the lower-right-most pad (the pad labeled "c" in the diagram on the

previous page). The Virtual Knob Selectors (K1, K2, K3, and K4) will flash once to indicate

Orbit is paired to the wireless USB receiver.

Wireless vs. Wired Performance

To change from wireless performance to "wired":

1. Disconnect the wireless USB receiver from your computer. (You can do this without

closing your software or powering Orbit off.)

2. Use the included mini-USB cable to connect Orbit to your computer. Orbit can now control

your software.

To change from "wired" performance to wireless:

1. Disconnect Orbit from your computer. (You can do this without closing your software or

powering Orbit off.)

2. Power Orbit off.

3. Connect the wireless USB receiver to an available USB port on your computer.

4. Power Orbit on. Orbit can now wirelessly control your software.

Tips for Optimal Performance

• The typical signal range is approximately 100 feet (30 meters) with a clear line of sight. If

you experience signal interference, move Orbit closer to your computer and/or remove any

obstacles between them (walls, furniture, etc.).

• Turn off your computer's Wi-Fi.

• If possible, turn off any unnecessary 2.4 GHz devices in the nearby vicinity (e.g., other Wi-

Fi devices, baby monitors, Wi-Fi access points, microwave ovens, etc.).

• Wireless MIDI can cause some latency. Usually, it is barely detectable, but if you want,

you can reduce it by using Orbit closer to your computer and maintaining a clear line of

sight between them. If your software lets you adjust the buffer size, reducing it can also

reduce latency, but make sure to keep your buffer size high enough to prevent audio

glitches.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark Orbit in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark Orbit Manual

Product: