618136

Numark Orbit Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Features
Top View Bottom View
P
AD
BA
N
K
2
3
4
1
K
2
K
3
K
4
K
1
1
6
6
5
5
1
2
3
4
b
a
c
7
8
9
10
All of Orbit's controls are MIDI-mappable, so they can control any MIDI-assignable command in your
software, giving you countless performance possibilities. Below are descriptions of the controls' general
behavior. To download pre-made control mappings for your software—and an editor to create your own
mappings—visit www.numark.com/orbit.
1. Pads: These 16 multicolor pads control various software commands as assigned in the MIDI mapping.
Switch between the 4 banks (of 16 pads each) with the Pad Bank Selectors.
You can assign different colors to these pads, as well. For more information, see the Color
Customization section of this manual.
Note: The pads labeled "a," "b," and "c" in the above diagram are used for customizing the
colors of Orbit's pad lights and for pairing Orbit to the wireless USB receiver. See the Color
Customization and Wireless Usage sections of this manual for more information.
2. Pad Bank Selectors (1, 2, 3, 4): Use these buttons to switch between the 4 banks of Pads. The
current Pad Bank Selector will light up.
The current Pad Bank Selector will flash to indicate Orbit's battery is low. When this happens, connect
Orbit's mini-USB port to your computer with a mini-USB cable.
3. Virtual Knob: This wheel adjusts various software features as assigned in the MIDI mapping. Switch
between the 4 functions with the Virtual Knob Selectors.
4. Virtual Knob Selectors (K1, K2, K3, K4): Use these buttons to switch between the 4 functions of the
Virtual Knobs:
• K1, K2, and K3: The Virtual Knob acts as a 270° knob—ideal for mapping to knobs controlling
filters, EQs, effects parameters, etc.).
• K4: The Virtual Knob acts as a 360° encoder for scrolling through your music library or acting as
a virtual platter (so you can search through the current track, scratch, or pitch-bend).
5. Shoulder Buttons: Hold down either or both of these buttons to activate Orbit's accelerometer, and
then tilt Orbit to affect it. The left shoulder button activates the accelerometer on the left-right axis. The
right shoulder button activates the accelerometer on the forward-back axis. The Pad LEDs will "stream"
in the directions it detects, and the streams will get faster as the tilt increases.
Tip: You can "latch" a shoulder button in the "on" position by double-pressing it. Return it to its
default "momentary" behavior by pressing it once.
6. Hooks: Attach a lanyard to these hooks to hang Orbit from your neck.
7. Strap Attachment: Unscrew the strap attachment and loop Orbit over an armband or belt, and then re-
tighten the strap attachment.
8.
Charging LED: This light will turn on when Orbit's internal lithium-ion battery is charging and turn off
when it is fully charged. See the Charging and Power Usage section of this manual for more
information about charging Orbit.
9. Mini-USB Port: Use the mini-USB cable to connect this port to a USB port on your computer. This
connection charges Orbit's internal lithium-ion battery (whether Orbit is powered on or not). It also
allows you to use Orbit "wired" instead of wirelessly.
10. Power Switch: Flip this switch to power Orbit on or off.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark Orbit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark Orbit in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info