618136

Numark Orbit Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
5
Charging and Power Usage
On a fully charged battery, you can use Orbit for approximately 8 hours. The 4 Pad Bank
Selectors will flash when Orbit's battery is low and needs to be charged.
To check Orbit's battery level, hold down Virtual Knob Selector K1. The 4 Pad Bank
Selectors will light up to indicate how much battery power is remaining (when all 4 Pad Bank
Selectors are lit, Orbit has a full battery). Release Virtual Knob Selector K1 and wait a few
seconds for Orbit to return to normal operation.
To charge Orbit, use the included mini-USB cable to connect it to (A) your computer's USB
port (with the computer powered on) or (B) a standard USB power adapter connected to a
power source. (You can still use Orbit even while it is charging.) Orbit's Charging LED will light
up when it is charging and turn off when it is fully charged. It takes approximately 3 hours to
charge Orbit's battery fully.
Important: Any battery's charge can deplete gradually even when it is not being used. If Orbit's
charge does not last for long during its first use or after a long period of disuse, charge it fully!
Orbit's Power-Save Mode will activate after 3 minutes of inactivity—Orbit will "go to sleep" to
preserve its battery charge. Move Orbit again to "wake it up."
Color Customization
You can select the color of the light for each pad in each bank, allowing you to color-code your
pads or banks to distinguish between their different functions in your software.
Orbit's memory is non-volatile, which means it will retain your color settings even after you
power Orbit off.
To select a color for a pad:
1. Press and hold down any Pad Bank Selector for 3 seconds, and then press either
shoulder button. The Virtual Knob Selectors will flash to indicate Orbit is in Color Selection
Mode (and is not currently controlling the software). Release all buttons.
2. Use the Pad Bank Selectors to select a bank, and then press the pad whose color you
want to select. (You can select multiple pads simultaneously. Press a selected pad to de-
select it.)
3. Use the shoulder buttons to cycle through the different available colors, which will be
shown in the selected pads.
4. Press and hold down any Pad Bank Selector, and then press either shoulder button. The
Virtual Knob Selectors will stop flashing, and Orbit's new pad color settings will be saved.
To clear/reset all colors for the pads:
1. Make sure Orbit is off.
2. Press and hold down Pad Bank Selectors 1 and 4, and then power Orbit on.
3. Press the upper-left-most pad (the pad labeled "a" in the diagram on the previous page).
The pad light colors will be reset to their factory defaults.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark Orbit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark Orbit in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info