803244
37
Zoom out
Zoom in
Previous page
1/61
Next page
35
9. Faults and how to remedy them
10. Technical data
Fault Cause Remedy
Sound but no
picture is
transmitted
The bandwidth (data transmission
rate) of the connection is
inadequate
Set camera settings to the lower values (see
"7.2.3 Camera settings" on page 33).
No image from the
camera is shown,
just the list of
available cameras
The UID has not been transmitted
correctly
Enter camera data using QR code or by
hand (see "6.1.2 Inputting camera data
manually" on page 28).
No alarm message
is sent to the
smartphone
Messages have been switched off Switch on messages (see "6.1.2 Inputting
camera data manually" on page 28).
Camera
Image sensor CMOS
Video illumination 8 infra-red LEDs
Min. 3 LUX light intensity
Baby's face clearly visible within 2 metres
Compression H.264
Resolution 640X480 VGA or QVGA
White balance Automatic
Audio Two-way talk function via analogue microphone and loudspeaker at
0.5 W, 16 kHz
Temperature sensor NTC type, 10 kΩ at 25 °C; deviation +/- 2 °C
Operating temperature 0° C to 40° C ambient temperature
Storage temperature -20 ° C to 70 ° C ambient temperature
Air humidity 40 to 90% rH (no condensation)
Power input External DC 5.8 V - 1000 mA
Mains connection EU specifications 100 ~ 240 V 50/60 Hz
Wireless connection
RF frequency range 2412 MHz - 2462 MHz (channel 1~11)
Wi-Fi standard 802.11b/g/n
RF initial output 11b: 21 +/- 1 dBm/11 Mbps;
11g: 18 +/- 1 dBm/54 Mbps;
11n: 17 +/-1 dBm/HT20 - 11n: 17 +/- 1 dBm/HT40
RF sensitivity 11b: -88 dBm/11 Mbps;
11g: -74 dBm/54 Mbps;
11n: -71 dBm/MSC7/HT20 - 11n: -68 dBm/MSC7/HT40
Range in open 80 m
Antenna Dipole
Internet bandwidth QVGA: min. required 1 Mbps, recommended 2 Mbps
VGA: min. required 2 Mbps, recommended 4 Mbps
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Smart Control Multi 310 - iOS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Smart Control Multi 310 - iOS in the language / languages: English, German, French as an attachment in your email.

The manual is 4.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info