803244

Nuk Smart Control Multi 310 - iOS Manual

35
Zoom out
Zoom in
Previous page
1/61
Next page
33
7.2.2 Connecting the baby monitor
to a WLAN router (Wi-Fi
access point)
This menu item is not available via the
internet.
The description can be found in
"5.4Connecting the baby monitor to your
WLAN router" on page26.
7.2.3 Camera settings
This menu item is not available via the
internet.
In this menu, you can adjust frame rate and
resolution.
• Frame rate can be set to 15fps (15 frames
per second) or 25fps (25 frames per
second).
– 25fps gives a smooth image, but has a
greater bandwidth.
• Resolution can be set as QVGA (320 x
240) or VGA (640 x 480).
– VGA gives an image with more pixels,
but requires a higher data transmission
rate.
1. Select the desired settings.
2. Confirm the settings with OK.
7.2.4 Adjusting the resolution of a
message
This menu item enables you to set when a
message is to be sent to your smartphone.
A message can be triggered when the set
temperature range is left or if noise in the
nursery exceeds a certain volume.
A condition for a sent message is that this
function is activated (see "6.1.2 Inputting
camera data manually" on page 28).
"Trigger Duration" means how long an alarm
has to be present in order to trigger a
message. If the alarm is shorter, e.g. in the
case of a very short sound, no message is
triggered.
1. To set the temperature range, select
"Temperature".
A menu opens:
2. Select the "permitted" temperature range
using the slide controllers. This is shown
in blue.
3. As soon as the temperature is outside the
permitted range, a message is triggered
after the set time (see next item).
Room temperature is measured with
temperature sensor 6.
4. Set "Trigger Duration" using the bottom
slide controller.
5. Confirm your entries with OK.
6. To adjust noise detection, select "Noise
sensor".
A menu opens:
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Smart Control Multi 310 - iOS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Smart Control Multi 310 - iOS in the language / languages: English, German, French as an attachment in your email.

The manual is 4.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info