803244
30
Zoom out
Zoom in
Previous page
1/61
Next page
28
monitor, not the area next to it. This is
required for the smartphone to be able
to focus the image.
If your smartphone was able to read the QR
code, the camera data is now visible at the
top of the screen.
In this case, proceed with the default
installation in "5.4Connecting the baby
monitor to your WLAN router" on page26.
If your smartphone was not able to read the
QR code, you will have to enter the camera
data by hand (see "6.1.2 Inputting camera
data manually" on page 28).
6.1.2 Inputting camera data
manually
Tap on the corresponding input field to enter
camera data manually.
UID: Unique IDentification Code. This
code ensures that the camera is easily
accessible from outside.
You will find the UID for the camera you
want to register on the rating plate
underneath of the baby monitor.
Password: the default password is
"12345678". Change the password once
the camera is registered. To prevent
misuse, the password should be
changed.
Description: this is the name of the
camera. If an alarm message comes in on
your smartphone, this is the name which
will be displayed. If you are making use of
several cameras, it is better to give each
camera its own name.
Message: this is where you set whether
the camera is to send messages in the
event of an alarm. Messages can be sent
if a certain noise level is exceeded or if
the ambient temperature is outside a set
value (see "7.2.4 Adjusting the resolution
of a message" on page 33).
Now continue with the default installation
(see "5. Starting up the baby monitor -
default" on page 25).
6.2 Registering another
camera to the smartphone
Note: up to 3 cameras can be registered to
one smartphone.
1. To register a new camera, tap
the button for new cameras.
2. Continue to enter the data with
"6.1.1Registering the camera to the
smartphone using a QR code" on
page27.
6.3 Registering the baby
monitor to other
smartphones
It is not only possible to register two baby
monitors to one smartphone. It is also
possible to register an existing camera to
several smartphones, e.g. the mother's and
the father's.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Smart Control Multi 310 - iOS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Smart Control Multi 310 - iOS in the language / languages: English, German, French as an attachment in your email.

The manual is 4.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info