803244

Nuk Smart Control Multi 310 - iOS Manual

29
Zoom out
Zoom in
Previous page
1/61
Next page
27
If you are not within range of your WLAN
(Wi-Fi) router and are registered to a WLAN
(Wi-Fi) access point, this connection will be
selected.
If no Wi-Fi network is available, the app will
use the wireless network to connect to the
camera. Your smartphone must be able to
connect to the wireless network quickly
enough for this to be possible (3G/UMTS
required as a minimum). Please note here
that transmission quality may be restricted
and you may incur costs from your provider
if you do not have a sufficient flat rate.
Note: as the data rate which can be
transmitted over an internet connection is
limited, you should reduce image data to the
smallest possible format (see "7.2.3 Camera
settings" on page 33). If the bandwidth of the
wireless network is inadequate, it is possible
that only sound and not video will be
transmitted.
6. Starting up the baby monitor - special cases
6.1 Registering the baby
monitor to the
smartphone manually
There are 2 instances in which you will have
to register the baby monitor to the
smartphone manually.
• When registering the first baby monitor,
the camera data was not transmitted to
the smartphone automatically. This may
happen with some routers or
smartphones. You will be able to tell this
has happened because no UID will be
entered for the camera:
In this case, proceed as described in
"6.1.1Registering the camera to the
smartphone using a QR code" on
page27.
• You want to register a second baby
monitor to your router or smartphone.
This case is described in "6.2Registering
another camera to the smartphone" on
page28.
6.1.1 Registering the camera to the
smartphone using a QR code
1. If no UID is entered for the camera,
tap the button for camera data.
The input menu appears:
2. Select "Scan QR code".
The QR code reader appears.
3. Hold the camera of your smartphone up
against the QR code on the bottom of the
baby monitor:
– the QR code should be well-lit;
– the focussing beam of the smartphone
should hit the bottom of the baby
i
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk Smart Control Multi 310 - iOS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk Smart Control Multi 310 - iOS in the language / languages: English, German, French as an attachment in your email.

The manual is 4.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info